Popular Post rodger. Posted August 21, 2016 Popular Post Report Posted August 21, 2016 I had a few minutes today, and some off cut 8/4 cherry. I made a knife insert for my kitchen, to help me protect my knives and keep organized. The entire project is made from a rough 8/4 piece of cherry, about 15" long or so, and 7" wide. I used TB3 and some 23 guage pin nails (on the hidden faces) to hold it altogether. The knife slots are simply table saw grooves about 1" deep, cut with a FTP blade. It fits like a glove in its new home, and should serve me well! Finish is 3 coats of HVLP sprayed water based poly. -Pug 5 Quote
rodger. Posted August 21, 2016 Author Report Posted August 21, 2016 1 minute ago, wdwerker said: That looks sharp ! Is that a pun? Thanks Steve! Quote
..Kev Posted August 21, 2016 Report Posted August 21, 2016 I did one like that in my kitchen.. Nice job Pug! Quote
-MattK- Posted August 21, 2016 Report Posted August 21, 2016 Put, I've had this on my to do list for ages, thanks for the inspiration! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.