Recommended Posts

Posted

I bet they're high quality and easy to work on.  Perhaps difficult to find parts and I certainly wouldn't be interested in dealing with the headaches...I have enough trouble with new tools.  But the old machines like that were made to last, and conventional wisdom is they're better than the Mickey Mouse crap they make now.  According to Mike's chart, they started making gold machines in the early 80s...right around the time when corporations decided the CEO's salary was more important than quality...I'd expect it to start declining at that point.  Although I believe the PM66 is a gold machine...correct me if I'm wrong.

Posted

Does the machine photo'd above look like the 'evergreen / metallic green' or the 'vista / pea green' to you guys? I'm curious because there seem to be a few of those type of machines in my area from time to time.  Thanks for the thoughts. I might consider taking a chance on one for something simple like a drill press, if there was no play in chuck and basic stuff like that seemed ok.

Posted
1 hour ago, Llama said:

I'd buy it in a heartbeat.

I had a Green 6" PM jointer, and absolutely loved it. Except for it being a 6"... 

That guy wants $450 for that drill press. And I'm not sure I want/need a drill press that high on my list of priorities right now. Just asking to acquire some info for future deals.

Posted

Looks like a PM 1100 bench model. Meaning not a floor model, it needs that little stand its on to be chest high. 425 is really high for a used DP even a floor model. To pay that much for a bench model is crazy land prices. Yes, there are people who pay that much for used powermatic drill presses. But without trying too hard you should be able to find similar machines for 200. Drill presses are pretty plentiful in the wild. 

Powermatic machines were very high quality throughout their entire production run while being made in America. Recent years powermatics have gone down in quality since they have moved overseas, but they all cut wood. Quality should not be your concern with this device except as it concerns whatever rebuild a machine of this age has gone through (because it either definitely has been rebuilt, or is WAY overdue for a rebuild). Someone who knows what they are doing will have no trouble putting new bearings in a drill press. Someone who has no idea what they are doing will introduce runout into a drill press that will essentially make it a boat anchor until the problem is corrected. Any time you go to look at a used drill press bring a long straight metal rod to test runout.

Posted
17 hours ago, JosephThomas said:

That guy wants $450 for that drill press. And I'm not sure I want/need a drill press that high on my list of priorities right now. Just asking to acquire some info for future deals.

All of those old powermatic tools are well built. As far as the price for that particular drill press, I think $450 is too high given that it is a bench top model and that the it appears the original power switch has been replaced with a wall switch.

If it was an 18" floor model that would be a good price.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 63 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined