Recommended Posts

Posted

I found several articles about Stanley H1205 jack planes, but the original box for the one I have

says only "Stanley No. 1205"-- no "H" . No model info on the tool itself.

So, is there a difference between "No. 1205" and "H1205" ?

Thanks,

 

/scm

Posted

Thanks !  Impressively fast help!

" if it is a #5 " -- I don't know what that means. All I know about the model number is the label on the original box, 
which says only

ONE ONLY                                                No. 1205

                         JACK PLANE

       STANLEY TOOLS, NEW BRITAIN, CONN., U. S. A. 
 

The back / underside of the lever cap has "C116" The frog has no info that I can see.
There is no other info on the plane or its parts, afaict. 

Thanks for the supertool site link -- I'd seen some others but not that one --, but it doesn't list any models with
higher numbering than # 608C. I checked some of its sub-lists (" #12 - #20 1/2", for example, in case the 1205
is a #12 variant) but didn't find anything. 

Posted

H is for Handyman, a line of planes somewhat less desireable as collectors often. A No. 5 comparison is covered in that it is called a jack plane. 

I think the H is redundant. I think the 12 in 1205 sets the plane apart as Handyman all by itself. 

Posted

ahh, I see. "No. 1205" may be base model 5, variant "12" . I didn't think of that. 

So, now knowing better how to read the SuperiorTool site (from stem to stern, including warnings about blood and gore), I understand more:
* My plane may not be a Stanley, after all. Although it is (and has been for decades) in a Stanley No. 1205 box, it does not have anything on the plane that labels it as a Stanley plane.
* It resembles #S5 but doesn't exactly match that or any other planes listed, afaict, since it has --
.. low knob
.. 14" sole (bottom)
.. 2 3/8" wide
.. 3 3/4 pounds (actually 3 lb 11 1/2 oz)
and does not have --
.. #46 Frog Adjusting Screw
.. the same lateral adjusting lever shown in the diagram

Thanks for the very useful and quick help!

Posted

To be clear, Stanley made many castings and parts for store brand planes. Handyman is a Stanley line. You can buy one new today labeled Stanley Handyman 1205. While it may not classify on the supertool site, it still should do good work. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.