Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Audio Question for the Techies

Featured Replies

Just bought a new TV, as well as a new soundbar.  Well, in fact I bought 2 soundbars, but the first one had a firmware issue and was not fully compatible with my TV.

Anyways, the new soundbar has only one HDMI port, which is an out via ARC to the TV.  So, connect "soundbar out" to "TV in ARC".  Works great!

Now, I would like to get a PS4.  Here is where the issue arises.  Since there is no "HDMI in" on the soundbar, I must connect the PS4 to the TV via HDMI (using an alternate port of course).

Will I lose lossless audio on Blu-ray when i do this?  I understand that connecting a device to the soundbar first (if possible) retains the lossless audio.  Not sure if sending it to the TV first will compress it in someway.

Wtnhighlander is right. A couple of concepts are being used interchangeably when they're not really equivalent.

* "Lossless" means that the signal has been compressed with an algorithm that uncompressing it will result in an exact image of the original. This is easy to do with pure digital information but difficult to do with analog information.

* Nearly all consumer gear does some form of conversion from digital to analog or analog to digital. Ideally there are as few conversions as possible along the path from source device to speakers.

* Different chips use different conversion methods to convert digital to analog or analog to digital. What this means for the average consumer is that you want to use the best conversion chip along the signal chain, e.g. if your Blu-ray player has the best chip, you want to use the analog outputs (if any) on your Blu-Ray. If your TV has the best chip, then use the TV's chip.

It's highly unlikely your Playstation has 5.1 analog outputs as that's an "audiophile" feature. If your soundbar has 5.1 analog inputs on the back, you can try two cable arrangements to see which produces the sound you like. First, connect your PS to your TV using HDMI, then connect the TV to the soundbar using HDMI. Play a Blu-Ray movie that you're familiar with and take a few notes on what you like and what you don't. This arrangement uses your soundbar's DAC (digital-to-audio converter) chip.

Then, remove the HDMI cable between your TV and your soundbar and connect the TV's 5.1 audio outputs to the soundbar's 5.1 audio inputs. Play the same movie and take notes.

Which one do you like the most? Use that setup.

This will not be true "lossless" audio, but in reality there is no such thing and for now I'd use your system for a while and enjoy what it can do. Audiophiles spend bazillions of dollars in pursuit of perfect audio reproduction at levels unmeasurable and imaginary. I've pulled back from that madness and my life is much calmer now, and as a result I have more money to spend on woodworking. :D

 

Hit up a tech forum sometime OP. Lossless is a tail chase now as most don't have the ear to distinguish between CD and MP3, much less other compression formats. The CD contains more info than your ear can hear, IF your system could even fully represent it. The diminishing return is rapidly reached with modern formats, but hotly contested with regularity. It can be fun to watch..,

Does the soundbar have an optical input, possibly labelled SPDIF? If that is the case you can get an optical cable that carries only the audio signal and that will go from the TV to the soundbar. Then for whichever input you have in to the TV it will get the audio.

  • Author
4 hours ago, AJ_Engineer said:

Does the soundbar have an optical input, possibly labelled SPDIF? If that is the case you can get an optical cable that carries only the audio signal and that will go from the TV to the soundbar. Then for whichever input you have in to the TV it will get the audio.

I do have optical on this unit, but I enjoy the convenience of arc for single remote use.  My understanding is that HDMI is preferable to optical, but I could easily be wrong.

I think you'd have to do the research on your particular tv to see if it will passthrough audio on that format. AFAIK, optical doesn't have lossless capability.

Your sound bar only has an HDMI out, not an in? I would think it would be the opposite.

17 minutes ago, Cochese said:

I think you'd have to do the research on your particular tv to see if it will passthrough audio on that format. AFAIK, optical doesn't have lossless capability.

Yes and no. TOSLINK will do two channel lossless. It is great for stereo audio formats for this reason. It is less desirable for video as we move to audio formats that require more than two channel in video applications. 

  • 2 weeks later...

ARC is a convenience thing but, unless something has changed in the last year, does not carry lossless 5.1 or 7.1 audio. @C Shaffer is also correct that TOSLINK will only do 2.1 lossless audio. If you want to retain full 5.1/7.1 lossless, you will need a separate connection to your soundbar and your TV from the source.

Out of curiosity, what is the brand/model of your TV and soundbar?

  • Author

Its a Sony htct390

I went with arc, and it works well.  The bar only does 2.1, so 5.1 lossless is not an option anyways.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.