Redfish Posted November 7, 2016 Report Posted November 7, 2016 Does anyone have any experience edge jointing 6 to 8 foot boards on the Ridgid 6 1/8" jointer? I've never used a jointer so not sure what the minimum bed length would be best for boards 6 foot to 8 foot long. Any other reviews on this jointer would be helpful. Quote
Jfitz Posted November 7, 2016 Report Posted November 7, 2016 I have that jointer. I've edge jointed boards up to about 5' in length but nothing as long as 8'. I like to get the edge "straight" on the table saw first, and then use the jointer just to clean up the edge. this is far preferable to trying to work out a crook or bow only on the jointer. Quote
..Kev Posted November 7, 2016 Report Posted November 7, 2016 You have to deal with what you have.. Be sure to provide good infeed and outfeed support with roller stands or similar. Quote
minorhero Posted November 7, 2016 Report Posted November 7, 2016 When jointing long boards it is sometimes helpful to touch them up on the table saw. the jointer can do the job perfectly but requires more skill then the table saw to get things really square and straight . 1 Quote
drzaius Posted November 7, 2016 Report Posted November 7, 2016 I built extension beds for my 6" Genereral out of MDF. They clamp to the ends of the jointer bed & have an adjustable leg to hold up the other end. Works great. Quote
bleedinblue Posted November 7, 2016 Report Posted November 7, 2016 I have that jointer. I've done 6 foot boards but not sure about longer. I'd go for it as long as you can rig up support in and out. Worst case, you get it close enough for the tablesaw. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.