xxdabroxx Posted December 12, 2016 Report Posted December 12, 2016 So I got a new blade this weekend, full 1/8" kerf Freud rip blade. Then I noticed that the blade that came with my Grizzly 715 was not a full 1/8" kerf. Does that mean that I need a thicker riving knife? The one that is on it now is .100" thk. Thanks, Dave Quote
Chet Posted December 12, 2016 Report Posted December 12, 2016 My rip blade is a full kerf and my riving knife is a thick 1/16 and I haven't had a problem. I don't think the riving knife's thickness has to be the same as your blade to work. Its purpose is to keep the tension in wood from closing so much it pinches the blade, causing kick back. Quote
CandorLush Posted December 12, 2016 Report Posted December 12, 2016 Per Grizzly, that riving knife is .100" so you're probably spot on. Seems like a pretty common question though as I am seeing a lot of the same but about bigger cabinet saws like the saw stop, all around .095-.105" Quote
Robby W Posted December 12, 2016 Report Posted December 12, 2016 The thickness of the riving knife doesn't matter as long as it is narrower than the blade. The important part is that the side of the knife nearest the fence be in line with that side of the blade. This makes sure that the piece being cut can't touch the blade and get trapped between the blade and the fence. I have a .105 knife and use .125 blades. 1 Quote
xxdabroxx Posted December 12, 2016 Author Report Posted December 12, 2016 Cool, thanks guys. One less thing I need to buy around xmas time. Now I need to get a full kerf combo blade to fill the hole I just made bigger in my zero clearance insert... LOL Quote
Ronn W Posted December 12, 2016 Report Posted December 12, 2016 21 minutes ago, Robby W said: The thickness of the riving knife doesn't matter as long as it is narrower than the blade. The important part is that the side of the knife nearest the fence be in line with that side of the blade. This makes sure that the piece being cut can't touch the blade and get trapped between the blade and the fence. I have a .105 knife and use .125 blades. I agree about the right side of the riving knife aligning with the right side of the blade. Very nice for holding the piece against the fence when ripping. But comes to it comes to preventing the wood from pinching the blade you don't want your riving knife to be too narrow or the blade will be pinched before the riving knife can prevent it.My Riving knife is .09 " thick and I have had the wood pinch the blade just a little before the riviing knife stops it. At .09" thick I can use it with a narrow kerf blade and it prevents the wood from pinching the blade but it does not keep the wood tight against the fence. I have not researched the possiblity of of having more than one riving knife. Quote
Robby W Posted December 13, 2016 Report Posted December 13, 2016 Ronnie wrote: "But comes to it comes to preventing the wood from pinching the blade you don't want your riving knife to be too narrow or the blade will be pinched before the riving knife can prevent it.My Riving knife is .09 " thick and " If you think about it, even with a full kerf blade and a .090 knife, we are only talking about a 1/32nd pinch, which isn't going to do much kicking back. The big kickback problem is when the board comes around the back of the blade and touches the teeth. If it hooks and you don't have a riving knife, you now have the full power trying to throw the board at you. From back when I hadn't equipped my saw with a splitter, I can tell you that really hurts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.