Hammer5573 Posted December 31, 2016 Report Posted December 31, 2016 I would like to know what components in a bandsaw make it good for Resawing? Quote
Tom Cancelleri Posted December 31, 2016 Report Posted December 31, 2016 I would like to know what components in a bandsaw make it good for Resawing? Wheel size, spine/pillar strength for tensioning, blade guides. Some might argue this one, but maximum blade size. Fence is important but is completely secondary as you can put almost any fence on. Sent from my Nexus 6P using Tapatalk Quote
Brendon_t Posted January 1, 2017 Report Posted January 1, 2017 Bulletproof adjustment holding would augment toms list. The saw ain't worth crap if it doesn't stay in tune while working. Quote
Chet Posted January 1, 2017 Report Posted January 1, 2017 Horse power - but if you have a saw with the above mentioned features, chances are it will have some proper horse power also. Quote
HuxleyWood Posted January 1, 2017 Report Posted January 1, 2017 A table large and low enough to manage large chunks of wood. Countour cutting bandsaws are often 40" or so at the table, resaws tend to be in the 32-34" range A table stiff enough to mount a decent sized feeder Wheels large enough to prevent fatigue cracks in medium gauge carbide/bi-metal blades Wheel/tire combinations that are either flat or have large radius crowns Horsepower in the range of 1/4hp per inch of resaw in domestic hardwoods this is solid for handfeeding and the bare minimum for power feeding which can utilize far more power A structure and tensioning assembly strong enough to tension a medium gauge 1"+ blade to 27,000-30,000 psi with minimal deflection Guides are not a huge concern with resawing provided the tension and cross section of the blade have enough beam strength The fence has to be rock solid with near zero deflection at and prior to the blade, especially important if it has to handle the pressure of a power feeder as well Enough height under the wheel covers and guides to handle a persons largest resaws The reality is few saws hobbyist consider function really well as a resaw but it is a matter of balancing budget and space. Outside of American iron the best medium sized steel saws sold today are the Centauro built Minimax saws and the Felder X10 series saws. Behind them you get the Laguna ACM built saws and the Felder X00 series saws. If a person has the room and is willing to deal with getting them in place you won't beat a 32-40" Yates, Oliver, Northfield or Tannewitz which can all be had for a song with a little looking but even with the room many people don't want to deal with getting these saws into place. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.