Curtis Posted January 1, 2017 Report Posted January 1, 2017 My planer keeps making these light chipping marks. Even when running the grain in proper orientation for planing. The blades I replaced in October. (And have seen a dining tables worth of Doug fir) when I replaced them I didn't adjust the chip breaker? Could this be the issue ? It's a Grizzly 15" made in 98. Thanks Quote
RichardA Posted January 1, 2017 Report Posted January 1, 2017 Could be chips stuck on the rollers, have you cleaned the rollers? 2 Quote
AceHoleInOne Posted January 1, 2017 Report Posted January 1, 2017 When I see this happening, usually I find that the chips aren't being cleared from my dust collector. Look for a plug or restriction in your ducts and give the planer a good cleaning with compressed air. -Ace- Quote
Curtis Posted January 1, 2017 Author Report Posted January 1, 2017 There are definitely extra chips flying around. And I think getting in the rollers. Just can't get rid of the chips. I'll check my D.C. Quote
gee-dub Posted January 1, 2017 Report Posted January 1, 2017 4 hours ago, Curtis said: There are definitely extra chips flying around. And I think getting in the rollers. Just can't get rid of the chips. I'll check my D.C. Agreed. How's your Dust Collection? Quote
Curtis Posted January 1, 2017 Author Report Posted January 1, 2017 I have a 1.5hp Shop Fox. And I hook it straight to Planer two feet away with a 10 foot hose 3 hours ago, gee-dub said: Agreed. How's your Dust Collection? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.