Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wood movement question / Barrister bookcase

Featured Replies

Building the bookcase and just finished the side panels.

Even though I watched the videos numerous times, just realized Marc uses plywood for the tops because of wood movement concerns.

I don't have the ply but do have plenty of hardwood (Sapele) that I could use.

since the pieces are only about 5" wide, is it an absolute no no to use solid wood?

Would pocket screws with no glue solve the problem?

Walnut ply not in the budget at the moment☹️

Are you referring to the tops of each section or the actual top of the whole bookcase.  The actual top was made of solid wood and attached with two row of three screws each, one row was slotted (elongated) for wood movement.

  • Author

Sorry should have been more clear.

I meant the tops of the individual units.

Solid wood for the individual tops in the same orientation as the design would move too much and cause problems. The best thing I can think of for getting around this would be a lot of trouble... you'd have to make each individual top a frame/panel assembly like the sides. 

I don't know what kind of can of worms you would be opening using the sapele in place of the ply.  Your top box has, by the plans one solid piece of ply and the other two have two 5 inch +/-  strips one in the front and one in the back and then the interlocking piece mounted to the top of the box below.  You need the interlock to be fairly snug or you boxes will slide back and forth on each other.  If you use solid wood you are going to have to allow for movement which means that part of the year your boxes will have to much room to slide and the other part of the year they will fit properly.  I don't know the situation in Philly but here I would have to leave a 1/16 inch gap in each interlock seam to allow for movement,thats an 1/8 inch total of slop.

If it were me, I think I would play it safe and just wait until I can put the money away for the ply.  Hopefully someone here can give you some ideas to use the material you have.

Chet, could he not use the Sapele for the front and back pieces and use 2 small 1x2's as the male center strips, thus less movement? And attach the 5" front and back pieces as Mike suggested? That 3/4" walnut ply IS expensive!

  • Author

Thanks.  I'll wait until I can get the ply. Really don't want to risk problems down the road.

14 hours ago, K Cooper said:

Chet, could he not use the Sapele for the front and back pieces and use 2 small 1x2's as the male center strips, thus less movement? And attach the 5" front and back pieces as Mike suggested? That 3/4" walnut ply IS expensive!

I would think it might.  My problem is I am too big of chicken :blink: to try something that goes against traditional wisdom structurally.  But that is just me, hopefully some one with more experience will chime in.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.