Seth Clayton Posted January 3, 2017 Report Posted January 3, 2017 How would you guys upgrade a contractor style table saw? I got a Dewalt 7480 due to budget constraints, and I'd like to stretch its capabilities as much as I can. I'm thinking about building it into a cabinet/table and I also want to improve the fence. I have a few sets of plans and design ideas for the cabinet, but am a little foggy as to what I can do for the fence. Will a new one be more part of the cabinet, or do I need to find something that can attach to the existing track on the saw? 1 Quote
Llama Posted January 3, 2017 Report Posted January 3, 2017 You can't install a dado on that saw, so doing anything with it long term will be a hassle. I'd suggest you use a router for dados, and just use the tablesaw for small rips. The MFT can do most of everything else you need. I don't even have a tablesaw right now, and didn't miss it on the last few projects I've completed. Sure, things like thin rips and dados would have been quicker, but there is a hell of a lot you can do with a tracksaw and router if you have to. Quote
Chet Posted January 3, 2017 Report Posted January 3, 2017 You might want to read through this recent thread. A lot of what you are thinking about was discussed here. I am not sure there is a way to up grade the fence on a saw like that. Fences that would be an improvement over what you have would require a rail system and I am not sure they would work with you saw. The other thing is you need to price this all out because you may find out that by the time you did everything you want to upgrade your current saw you may end up spending the same amount of money that it would take for you to just upgrade to a cabinet saw from Grizzly. If you went this route you would have everything you are trying to accomplish plus some things like a cast iron top, beefier trunnion, bigger motor all things that would make woodworking nicer. Quote
Seth Clayton Posted January 3, 2017 Author Report Posted January 3, 2017 3 minutes ago, Llama said: You can't install a dado on that saw, so doing anything with it long term will be a hassle. I'd suggest you use a router for dados, and just use the tablesaw for small rips. The MFT can do most of everything else you need. I don't even have a tablesaw right now, and didn't miss it on the last few projects I've completed. Sure, things like thin rips and dados would have been quicker, but there is a hell of a lot you can do with a tracksaw and router if you have to. This should read: "You can't install a Dado that's wide enough to be worth a damn!" LOL I do have a stack, but found in my last project that it definitely can't handle 3/4" worth of blades, chippers and shims. The router did the dado work for that project nicely. I think I should live with the MFT for a bit and see if the TS starts to collect dust! 5 minutes ago, Chet K said: You might want to read through this recent thread. A lot of what you are thinking about was discussed here. I am not sure there is a way to up grade the fence on a saw like that. Fences that would be an improvement over what you have would require a rail system and I am not sure they would work with you saw. The other thing is you need to price this all out because you may find out that by the time you did everything you want to upgrade your current saw you may end up spending the same amount of money that it would take for you to just upgrade to a cabinet saw from Grizzly. If you went this route you would have everything you are trying to accomplish plus some things like a cast iron top, beefier trunnion, bigger motor all things that would make woodworking nicer. Good points here as well. Both of you guys convinced me that building that cabinet is probably a lot of wasted effort for now. Quote
Llama Posted January 4, 2017 Report Posted January 4, 2017 31 minutes ago, Seth Clayton said: This should read: "You can't install a Dado that's wide enough to be worth a damn!" LOL Dewalts website recommends against using a dado in that saw due to the arbor length. Quote
Seth Clayton Posted January 4, 2017 Author Report Posted January 4, 2017 23 minutes ago, Llama said: Dewalts website recommends against using a dado in that saw due to the arbor length. Gotcha. Rockler sells these guys: http://www.rockler.com/rockler-perfect-fit-dado-jig Wonder if that would work in conjunction with the track on the MFT? Quote
Llama Posted January 4, 2017 Report Posted January 4, 2017 Just now, Seth Clayton said: Gotcha. Rockler sells these guys: http://www.rockler.com/rockler-perfect-fit-dado-jig Wonder if that would work in conjunction with the track on the MFT? I don't think so. Quote
gee-dub Posted January 4, 2017 Report Posted January 4, 2017 2 hours ago, Seth Clayton said: Gotcha. Rockler sells these guys: http://www.rockler.com/rockler-perfect-fit-dado-jig Wonder if that would work in conjunction with the track on the MFT? I tried the tablesaw plate version of that. I had to return it because it was so poorly made. It's too bad because the guides are very nice. Quote
Seth Clayton Posted January 4, 2017 Author Report Posted January 4, 2017 23 minutes ago, gee-dub said: I tried the tablesaw plate version of that. I had to return it because it was so poorly made. It's too bad because the guides are very nice. That's unfortunate! They're a brilliant idea! Quote
knotscott Posted January 4, 2017 Report Posted January 4, 2017 For clarification, your saw is a portable jobsite saw. A contractor saw is generally larger made of cast iron, and has a belt drive induction motor....it's sort of a confusing misnomer because most contractor don't actually these saws anymore. With that said, I can't help but wonder if you'd be better served by an actual full size contractor saw than to spend the time and money building a workstation around the jobsite saw? You'd have a larger surface area with a lot more space in front of the blade, more mass and stability, a quieter motor with more torque, and a lot more upside for upgrades, accessories, and modifications. I routinely see good options on Craigslist in our area for $100-$250. Food for thought.... Quote
Waldvogel Review Posted January 4, 2017 Report Posted January 4, 2017 16 hours ago, Seth Clayton said: How would you guys upgrade a contractor style table saw? I got a Dewalt 7480 due to budget constraints, and I'd like to stretch its capabilities as much as I can. I'm thinking about building it into a cabinet/table and I also want to improve the fence. I have a few sets of plans and design ideas for the cabinet, but am a little foggy as to what I can do for the fence. Will a new one be more part of the cabinet, or do I need to find something that can attach to the existing track on the saw? I am on the same fence you are ! i own a 7480 and had plans to upgrade it. Just purchase some nice phelonic inserts for it and everything. I just ordered a Delta T2-30 fence to create such a beast. But i have the opportunity to pickup a Craftsman 113.22090 from the 50's for about 60 bucks. Very nice belt drive 1 horse motor. My fight is that the dust collection on the dewalt is FRICKEN AMAZING. The shroud does exactly what i need it to do and if im going to build a wooden outfeed and side feed for the cast iron base, whats the big deal between using a contractors saw in the center vs the cast iron center? I would be creating something inspired off the askwoodman videos on YouTube. Less metal and more wood? 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.