Nicolette Posted May 13, 2017 Report Posted May 13, 2017 I have a six in one Emcostar star machine. When we fit a new bandsaw blade it lasts a short while, while I use the banksaw, and then it snaps. What could I be doing wrong? Quote
gee-dub Posted May 13, 2017 Report Posted May 13, 2017 Tension? Too aggressive of a curve? Blade hitting something in the path that it shouldn't? What size blade? Is it breaking at the weld? What are you cutting; material, thickness, method? did this just start happening or has it always done this? The Emco-star is an interesting machine but, the bandsaw wheels are small and this can cause issues with some blades. The old three-wheelers were also prone to blade failure for the same reason. Olsen or better quality blades should be no issue however. Quote
Nicolette Posted May 14, 2017 Author Report Posted May 14, 2017 Thanks for the advice, will test other blades, because these always break at the weld. Quote
Tpt life Posted May 14, 2017 Report Posted May 14, 2017 Always breaking at the weld says the blade is not made to bend over the small radius of your wheels. G-Dub hit it in his third paragraph and your statement confirms this. I don't know what the fix it. When the weld material bends tight and then is pulled "flat" again it gets brittle. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.