Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Furniture subject to freezing

Featured Replies

  • Popular Post

I would say that any finish is alright.

The issue I see is not the freezing, but the speed with which the swing happens. If the cabin slows the freezing and thawing then anything goes. If there are wild daily swings, I would think about things far more carefully. 

8 hours ago, wtnhighlander said:

Freezing temperatures are not a problem for most furniture finishes, unless there is also a good deal of moisture / humidity involved. I'm sure most any finish you choose will be ok.

Ross got it...wood reacts much more violently to changes in humidity than to changes in temperature.  It just so happens that these changes often happen simultaneously (warmer air has the capacity to hold much more moisture).

Bryan's idea of using a spar varnish is a good one, because their formulas are designed to be more flexible and therefore are capable of "stretching" with more significant wood movement, whereas other finishes are typically harder and therefore more brittle, and have the tendency to "crack" more easily.  So spar varnish may be something worth exploring, though I'm not sure it's necessary for indoor furniture, regardless of temperature.

What IS critical, is that you choose your lumber wisely, using only material that is properly dried and acclimated to your particular environment, and that you follow wood movement rules in the construction of your piece to avoid mechanical failures in the wood.  If you're finishing pre-made furniture, obviously these factors are out of your control.

One thing you have going for you is that air/moisture exchange slow significantly in cooler temperatures and basically stops at freezing temperatures.  

Cold and dry is better for wood than warm and dry.   Wood will shrink significantly less in dry, frozen temperatures than it will in dry, warm temperatures.  

Modern forced air HVAC systems often give 70F 25 RH% conditions.  That is hell on wood.  We like to think that modern HVAC is better for wood, but it is actually worse. 

 

I don't think you should have any worries. Take a look at all the camping trailers in the north with furniture and solid wood kitchen doors including mine. Those bad boys winter just fine. Matter of fact, the winter a few years back, it was so cold the vinyl flooring had cracked ~ furniture/wood coated items were just fine.  

 

-Ace- 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.