bushwacked Posted June 21, 2017 Report Share Posted June 21, 2017 Looking for a couple saws. A flush trim saw and then maybe a bigger saw like below ... Dozuki "Z" Saw https://www.amazon.com/dp/B001DSY7G6/ref=cm_sw_r_cp_api_RLDszbEHPB4CG Thoughts? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
prov163 Posted June 21, 2017 Report Share Posted June 21, 2017 I really like the Lee Valley flush trim saw. If you're going to a Japanese pull saw make sure to get one with replaceable blades. I have a Gyokucho I bought at HWW and I like it a lot. 1 Quote Link to comment Share on other sites More sharing options...
bushwacked Posted June 21, 2017 Author Report Share Posted June 21, 2017 3 minutes ago, prov163 said: I really like the Lee Valley flush trim saw. If you're going to a Japanese pull saw make sure to get one with replaceable blades. I have a Gyokucho I bought at HWW and I like it a lot. ok I will take a look ... The one I linked has this in the product description ... Quote Dozuki Saws with replaceable blades feature the precision and durability of tensioned high carbon steel blades which are easily removed from their bamboo-wrapped handles for replacement when worn. Quote Link to comment Share on other sites More sharing options...
BonPacific Posted June 21, 2017 Report Share Posted June 21, 2017 I have the same Dozuki. It cuts well and the head is decently built, no play in the blade. Handle is pretty cheap/light feeling, but I haven't had a problem with it yet (had it about a year). Quote Link to comment Share on other sites More sharing options...
Immortan D Posted June 21, 2017 Report Share Posted June 21, 2017 15 hours ago, bushwacked said: Dozuki "Z" Saw https://www.amazon.com/dp/B001DSY7G6/ref=cm_sw_r_cp_api_RLDszbEHPB4CG Great saw for dovetails and other delicate cuts. If you don't use it properly it will start loosing their teeth. But it's a cheap saw and replacement blades are cheap too, so no big deal. Quote Link to comment Share on other sites More sharing options...
AceHoleInOne Posted June 21, 2017 Report Share Posted June 21, 2017 For cutting plugs and stuff, use a hack-saw blade. Protect your hand by covering the teeth with duct-tape. -Ace- Quote Link to comment Share on other sites More sharing options...
Ronn W Posted June 22, 2017 Report Share Posted June 22, 2017 Believe it or not I use a DeWalt flush trim saw from Home Depot - works fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.