Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Question about Purpleheart

Featured Replies

So I've now turned 2 pens with purpleheart and both have turned brown.  As I've been reading, the color changed once cut from brown to purple taking anywhere from a few days to a few weeks and then, with exposure to UV light, it will turn brown again.  My question is what causes it to turn purple in the first place?  Exposure to light?  Oxygen?  Should I wait a few weeks after turning to finish it?  I just bought a big chunk of it to turn into a larger version of the dice caddy I posted last week and I want the rich eggplant color to offset bird's eye maple.  Should I build the piece and just wait to finish it?  How do I get the rich purple color I'm seeking?

Purpleheart is impossible to predict.  I've seen purple turn brown and brown turn purple and there doesn't seem to be any rhyme or reason to it.  My advice would be just stop using it...since it's butt ugly no matter what color it is.  And it's hard and oily and it stinks.  Two thumbs down.

Well, Eric gave a more informative answer than I expected him to, I was expecting a simple "Say No to purple heart" :P

I have a PH pen blank that I've been wanting to turn for about 18 months, but just haven't yet.  It's a great deep purple color, but I have no expectations for it to stay that way after I make the pen, but I'm Hoping to get lucky. 

 

3 hours ago, SirNot said:

So I've now turned 2 pens with purpleheart and both have turned brown.  As I've been reading, the color changed once cut from brown to purple taking anywhere from a few days to a few weeks and then, with exposure to UV light, it will turn brown again.  My question is what causes it to turn purple in the first place?  Exposure to light?  Oxygen?  Should I wait a few weeks after turning to finish it?  I just bought a big chunk of it to turn into a larger version of the dice caddy I posted last week and I want the rich eggplant color to offset bird's eye maple.  Should I build the piece and just wait to finish it?  How do I get the rich purple color I'm seeking?

Here is a good read by @phinds.  I have used his "cooking for color" method several times.  Works for me most of the time.  There is even a quote from @Eric in the article.

  • Author
1 minute ago, Just Bob said:

 

Here is a good read by @phinds.  I have used his "cooking for color" method several times.  Works for me most of the time.  There is even a quote from @Eric in the article.

Link?

4 minutes ago, SirNot said:

Link?

Just go to my purpleheart page

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.