Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tacky ARS on one area of table - Help

Featured Replies

I'm refinishing the red oak table I made in HS 23 years ago for my mom. I scraped and sanded it down to 150 grit. Wiped it clean with a tack cloth. Then applied one coat of GF honey oil stain. Let it dry for 5 days while at work. I then applied a coat of GF Arm R Seal this past Thursday evening. Four days later (today), the table and removable leaves are perfect and are ready to be lightly sanded before the second coat, except for one board on one side of the table. The board has always been a little darker even when I built the table. It is 4/4 thick by 6" wide by 4' long and tacky. Right at the seam of the joining board and along the entire length is tacky. The other board is fine like the rest of the table. But this 6" wide by 4' long section is tacky. I lightly sanded it and it was a little gummy as expected and it is a little better now, but still not cured enough for the next coat. Please help, I'm stumped. Thanks, bill

P. S. I've included a photo of the table. You can see on the right side of the table the darker problem board. But it has always been a tad darker. I can't figure this out. Everything else on the table is perfect. 

IMG_20170720_191256.jpg

  • Author

I'm thinking it's a different species also. It's been a while since I built it. Can't remember. Probably got my lumber mixed up with another project back then. I'm baffled by the ARS not curing on that particular board. Thanks for any and all help with this in advance. 

  • Author

I wonder if I should remove the one coat of ARS and the stain on this half of the table and scrape and sand again? Restain and apply ARS again? 

I haven't the foggiest idea why that one board wouldn't cure when all the others did either but since it didn't, something's gotta give.  Looks like you will be having to strip down that one board at least, prep the surface again and give it another coat. May wanto confirm the stain and ars are compatible. If not, a barrier layer of shellac should fix any adhesion issues. I'm not familiar with that stain but you should know if the arm r seal is good to go the next day.

Even if it's another species of oak that's not the reason it's not curing properly.  I don't know of any oak that's so oily it would cause a problem.  I would assume it's an issue with old finish/stain not thoroughly removed.

That said...just give it more time.  It will dry eventually.  But you don't want to move on until it's completely dry.  I experienced slower dry times on oily exotics a few times in the past.  But they do eventually dry.  Be patient.

  • Author

Eric, in your opinion how long should I wait? Would it help to have a small fan blowing on it? After the light sanding I gave it yesterday with 400 grit to try and get some of the excess gumminess off, it felt a lot better but still a little tacky so I backed off and came to you guys for help. Thank you

1 minute ago, wwnewb said:

Eric, in your opinion how long should I wait?

Until it's dry. :)

Yes you can put a fan on it and that might speed it up a little.  Wait until it's completely dry to the touch before you put on another coat.

The reason it's taking that portion longer to dry, focus on the grain. See how much deep grain you have. Those are thousand and thousands of little swimming pools retaining finish. Give it time and you should be fine.

 

-Ace-

  • Author

Thanks for everyone's help. Don't know who's panicking more, mom or me! 

Tell mom, if she wants is done right...it needs time to dry and can't be rushed. Tell her, I told you so. I got your back...:D

 

-Ace-

On 7/25/2017 at 3:36 PM, AceHoleInOne said:

Tell mom, if she wants is done right...it needs time to dry and can't be rushed. Tell her, I told you so. I got your back...:D

 

-Ace-

I'd think 23 years is plenty of time.....  ;)

  • Author

I just wanted to update everybody on the situation at hand. I put two fans on that tacky part of the table on high for about four or five days. And it got a little bit better but it was still fairly tacky. So desperate times call for desperate measures. My dad and I carried the table top out of the shop and set it down outside in direct sunlight. It wasn't an overly hot day, about 78 degrees with low humidity. So a really good day in my opinion. We only let it sit out there for about 4 hours and we carried it back in and put the fans back on it and let it sit overnight. The next day it was perfect! No tackiness, perfectly smooth like the rest of the table. I was elated. I cannot thank you guys enough for all of your help. As of today I put the second coat on and since the first coat is on and cured and hardened I would imagine that the second coat should work and cure like it's supposed to. Thanks again for all your help. Bill

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.