Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

DC Hose Protection for a Shop On Wheels

Featured Replies

My shop is a cluttered two car garage barn. All of my large machines are on wheels and I am having to move these machines quite often. Due to the portability issue, hard piping to the dust collector (which is also is wheels) is not feasible.

The hoses are constantly being dragged across the rough concrete floor and I'm concerned about damage to the hoses. 

What would be a good medium to protect the hoses from the concrete floor? Duct tape, some type of abrasive resistant wrap? I don't have any damage yet but would like to address the issue before it becomes a problem. 

Any suggestions would be appreciated.

Steve

 

Steve, I have the same delima. Who's hose are you using? Mine is from Rockler and the soles of my sandals will give out first from changing it from machines. 

  • Author

Some are from Harbor Freight and one from Woodcraft. I don't see any difference in quality between the two. I don't have any wear problems yet, just trying to look into future problems. Every time I move these machines I cringe at the fact that these hoses are being dragged across the rough concrete floor. 

Working in industrial machine shops for over 30 years has taught me to look out for these things. I've seen some pretty scary stuff over the years. Not that an abrasion hole in the DC hose is scary, just want to protect them as much as possible.

I haven't given it a thought until now? Nah, still don't! Blue painters tape and blue duct tape are my best friends.

The hoses I use on mobile machines have quick coupler ends (slightly flared for a friction fit). 

59852eef1e3ec_DCQRHose(4).jpg.c823c1dc0c6393a47938a352de65fe03.jpg

59852eefaa555_DCQRHose(5).jpg.4bd2aaeed44af4b968ae26198023f7cf.jpg

59852ef0316d6_DCQRHose(6).jpg.5f36f4962bd1f28acafedba32fa69034.jpg

59852ef0bbe25_DCQRHose(7).jpg.ff4fa2df8e7511a185a7a8ba3defee12.jpg

59852eee26a1a_DCQRHose(2).jpg.160f36bc806616b9449d2b8acc5cca00.jpg

59852eee8b272_DCQRHose(3).jpg.2d9b62db42f2348509fef6782e9d310b.jpg

59852eed997c9_DCQRHose(1).jpg.0a661d35668bc99a16d9faa01dd18903.jpg

The hose comes off at both ends and hangs from a small hook I made from solid copper wire.

  • Author
13 minutes ago, K Cooper said:

I haven't given it a thought until now? Nah, still don't! Blue painters tape and blue duct tape are my best friends.

I'm think duct tape on the bottom should work too.

  • Author
12 minutes ago, gee-dub said:

The hoses I use on mobile machines have quick coupler ends (slightly flared for a friction fit). 

59852eef1e3ec_DCQRHose(4).jpg.c823c1dc0c6393a47938a352de65fe03.jpg

59852eefaa555_DCQRHose(5).jpg.4bd2aaeed44af4b968ae26198023f7cf.jpg

59852ef0316d6_DCQRHose(6).jpg.5f36f4962bd1f28acafedba32fa69034.jpg

59852ef0bbe25_DCQRHose(7).jpg.ff4fa2df8e7511a185a7a8ba3defee12.jpg

59852eee26a1a_DCQRHose(2).jpg.160f36bc806616b9449d2b8acc5cca00.jpg

59852eee8b272_DCQRHose(3).jpg.2d9b62db42f2348509fef6782e9d310b.jpg

59852eed997c9_DCQRHose(1).jpg.0a661d35668bc99a16d9faa01dd18903.jpg

The hose comes off at both ends and hangs from a small hook I made from solid copper wire.

Nice setup Gee but I'm too old to be crawling underneath the tablsaw to disconnect the hose.

On 8/4/2017 at 7:58 PM, Steve B Anderson said:

After a closer look at your pics, the ground clip replacing the screw on the wire clamp in very clever. Nice!!!

That end happened to use one of the thread-in type of connectors.  The wire is a bit of the wire helix that runs around the hose as part of its construction.  The wire is captured under the wire hose clamp at the other end.  I use both types, whatever I happened to have picked up on sale or at the shows.

On the mobile platform that holds the dc, add a tall arm and hang the hose over that so it won't drag.

On 8/4/2017 at 10:33 PM, K Cooper said:

I haven't given it a thought until now? Nah, still don't! Blue painters tape and blue duct tape are my best friends.

Why, may I ask, does the duct tape have to be blue?

  • Popular Post

It just happened to be the color I bought last and thought it was pertty;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.