difalkner Posted August 26, 2017 Report Posted August 26, 2017 I needed to cut some splines for a Walnut door for a rifle display case I'm building and thought I'd do it on the CNC. Here's the door with splines before gluing and sanding - And here's the video on making this - Enjoy! David 2 Quote
Coop Posted August 27, 2017 Report Posted August 27, 2017 Pretty cool video there David! Did I detect a little LSU purple there? 2 Quote
difalkner Posted August 27, 2017 Author Report Posted August 27, 2017 Thanks, Coop! LSU purple but not LSU shirt. I have donated platelets for the last 25 years or so and get a tee shirt each time I go, which for years was every two weeks. I probably have a dozen LSU purple shirts but they all say Lifeshare Blood Center on them. David 1 Quote
Cheeset202 Posted August 27, 2017 Report Posted August 27, 2017 Nice job David, what type of CNC are you using? 1 Quote
difalkner Posted August 27, 2017 Author Report Posted August 27, 2017 Thank you! The frame is a Saturn 2x4 from Fine Line Automation, the prototype, actually. I designed, sourced, and built everything else including the electronics. It's a pretty stout machine - very rigid, accurate, repeatable, fast, and heavy (around 600 lbs. with everything mounted). David Quote
Klappco Posted August 27, 2017 Report Posted August 27, 2017 Very cool. Sent from my iPad using Tapatalk 1 Quote
Cheeset202 Posted August 27, 2017 Report Posted August 27, 2017 12 hours ago, difalkner said: Thank you! The frame is a Saturn 2x4 from Fine Line Automation, the prototype, actually. I designed, sourced, and built everything else including the electronics. It's a pretty stout machine - very rigid, accurate, repeatable, fast, and heavy (around 600 lbs. with everything mounted). David Ok, that's impressive!!! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.