Popular Post Cliff Posted October 20, 2017 Popular Post Report Posted October 20, 2017 For the wife. Made from white oak that I bought last year for like $1/bf. Wasn't real useful for anything else cause it was seriously warped. Like most of my own designs, it is horribly flawed and I screwed up everywhere. But.. the end result is exactly what I need it to do so I'm happy. I put 4 or 5 coats of Helmsman Spare Urethane on it. Same stuff I sprayed on the shed. This stuff brushes horribly. I cannot recommend it. However, if it's thinned at 20% it sprays pretty well. I have to do some touchups yet, you can see exposed endgrain on the left support because I put it too far to the left so when it folds back it hits the edge trim, so I sawed about 1/8" off. There is also exposed wood where I had to drill out wood for the bolts on the hinges - otherwise it wouldn't fold down all the way. 6 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.