Marmotjr Posted December 20, 2017 Report Posted December 20, 2017 9 hours ago, Ronn W said: Great. But as you hone them doesn't that change relationship of the blade to the rollers? To sya it another way - doesn't the depth of cut change slightly? Maybe it's sucha samll amount that it does not matter. Do you have infinitiy re-hone them? I don't use the indicated depth anyways. I use the material to be removed gauge to not take too big of a cut, and I'll measure the piece when it comes out, and take a bit more if needed. I will use the preset stops so I don't accidentally plane past a given depth, and if the piece is a bit thicker due to shorter blades, all the better, I can take another light pass to get it there. Quote
Isaac Posted December 20, 2017 Report Posted December 20, 2017 Realistically most people probable don't swap the blades out right in the middle of milling up some boards for a project unless there is a major issue. Quote
Coop Posted December 20, 2017 Report Posted December 20, 2017 I’d say the consensus is the 735 with the blades ( upgraded to the Infinity when you notice the stock ones getting dull), a 14” band saw with a riser, and as you will still have money left, get a decent dust collection and buy the Mrs. a nice Christmas present. Both of you will be happy. And welcome to the forum! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.