Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to protect a new sheesham wood headboard?

Featured Replies

I just got a sheesham (Indian Rosewood) bed frame. It's a thick sheesham veneer on top of acacia wood.

The care instructions say to only dust with a dry cloth. It does not have a finish on it (it feels dry). I am concerned about it cracking/warping due to the dry winter conditions (lots of forced air heat). I use a humidifier nightly. 

Should I treat the wood and with what? I bought Howard's Feed & Wax but have not used it because I'm worried about ruining the wood. I also don't want it to look too shiny.

Thank you for any suggestions!

IMG_20171217_230202.jpg

IMG_20171217_230226.jpg

If the humidity doesn't vary wildly there is little chance of it cracking/warping. Myths about needing to feed wood are bull. Any wax or furniture polish won't hurt. I would try whatever you choose on the back of the headboard and see how it looks. Then wait a few weeks and take another look before you commit to doing the whole bed. Don't slather it on . A thin coat with a clean cotton rag (old tee shirt) should be sufficient. 

  • Author

Thank you wdwerker! Is coconut oil a good option? I use it on my decorative teak and it looks great.

  • Popular Post

Be careful with any raw vegetable based oil cause they can (will) go rancid. 

59 minutes ago, Jacko23 said:

Thank you wdwerker! Is coconut oil a good option? I use it on my decorative teak and it looks great.

I would definitely air on the side of caution there. Personally, if go with Steve's recommendation, wax the back and see how you like it

Don't use vegetable oil, like Frank said it can go rancid. I just looked up the ingredients in the Howard's stuff you have, that should work just fine. Feeding wood is just worthless marketing buzz words. I have used some other Howard's products it's a familiar brand. 

I would clean your teak with a mild cleanser, spray it on a rag lightly & rub, don't spray directly on the wood. Something like Simple Green diluted or ready to use stuff, not the concentrated type. Let it dry a day or so. Repete if you still smell coconut oil. Then use the Howard's wax/polish on the teak. It has mineral oil & orange oil which won't go rancid plus carnuba wax (which is a very hard wax) and beeswax which is a softer wax. Apply it sparingly, thin coat. I would still do a test on the back of the headboard so you can familiarize yourself with the product. 

If this were me, I would use Arm-R-Seal by General Finishes, a good film finish. Not really to seal the wood from seasonal changes. More for protection from the humans we are. The oils from your hair and arms that come in contact with the wood. Over time, the unprotected wood will become dirty looking above the pillows. 

 

-Ace-

1 hour ago, AceHoleInOne said:

If this were me, I would use Arm-R-Seal by General Finishes, a good film finish. Not really to seal the wood from seasonal changes. More for protection from the humans we are. The oils from your hair and arms that come in contact with the wood. Over time, the unprotected wood will become dirty looking above the pillows. 

 

-Ace-

Very good advice. To maintain a more natural wood appearance, use the matte finish as opposed to semi-gloss. Arm-R-Seal is super easy to apply.

The ARS they are referring to should not be applied over the Howard's Wax. So it's one or the other. Both are valid things to apply to protect the furniture. But the wax would be hard to remove completely enough for the wiping varnish to adhere. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.