tomy josif Posted May 22, 2020 Report Share Posted May 22, 2020 What company is good to buy pre glued iron on edge banding, i have looked on amazon and there are so many options? Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted May 22, 2020 Report Share Posted May 22, 2020 I can't recommend one. In my experience, iron-on banding is a failure waiting to happen. Your mileage may vary. Quote Link to comment Share on other sites More sharing options...
drzaius Posted May 22, 2020 Report Share Posted May 22, 2020 For melamine edge banding, iron on is the only kind I've seen, unless you get into the machine applied that large commercial shops use. Quote Link to comment Share on other sites More sharing options...
BillyJack Posted July 17, 2020 Report Share Posted July 17, 2020 We always used Dolken in the shop. Not sure if they make and iron on.. key is the thickness. Too think veneer with thick glue looks horrible. I remember some stuff from Woodcraft that was real thick.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.