Popular Post collinb Posted December 1, 2022 Popular Post Report Share Posted December 1, 2022 After attaching edge banding the trimming can be challenging. Sometimes the grain isn’t exactly straight. Then when I take that edge trimmer across it, sometimes it will snag the grain and tear into the glued part. And that’s not nice. These days I take a little longer to trim it. And I end up with no tearing into what was glued down. It’s a simple technique. First I bend down the excess as though to break it off. But don’t. Then I set the block plane very shallow and go across the edge a few times at an angle akin to softening the edge. Once through you’re done. I use the Record 060 1/2. It just has a better feel in my hand than the Stanley 60 1/2. 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.