Ethan Heilig Posted March 27 Report Share Posted March 27 I am making an Epoxy kitchen table and cracked the epoxy. The issue is it didn’t crack all the way through so the top of the epoxy is fine. There is an air gap between the wood top and the first layer of epoxy. Can I drill a hole to fill the air gap with epoxy or use a Dremel to cut down all the way to the wood and just feel the hole back with epoxy? If you could let me know what you think would be the best way to solve the issue it would be greatly appreciated, thank you! Quote Link to comment Share on other sites More sharing options...
drzaius Posted March 27 Report Share Posted March 27 Pictures please. Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted March 28 Report Share Posted March 28 Pictures will certainly help. From your description alone, it sounds as it it may look better to drill a small hole up through the wood and inject epoxy to fill the void. 1 Quote Link to comment Share on other sites More sharing options...
Mark J Posted March 28 Report Share Posted March 28 @Ethan Heilig, pictures will certainly help, but we should mention that newly joined members have to make a few posts before the "Add Files" button is active. Posts can be anywhere in the forum. Quote Link to comment Share on other sites More sharing options...
Ethan Heilig Posted March 28 Author Report Share Posted March 28 Epoxy Picture Quote Link to comment Share on other sites More sharing options...
JohnG Posted March 28 Report Share Posted March 28 Embedding photo here for convenience Quote Link to comment Share on other sites More sharing options...
drzaius Posted March 28 Report Share Posted March 28 Drill a tiny hole through the epoxy at each end of the fault. Then use a vacuum at one hole and a syringe of epoxy at the other suck epoxy into the void. When cured, sand and buff out the surface. 1 Quote Link to comment Share on other sites More sharing options...
Ethan Heilig Posted March 29 Author Report Share Posted March 29 I will try that, thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.