Recommended Posts

Posted

Normally, I'm less than impressed with any of the sharpening videos. I tend to avoid them now because I get frustrated with the blind alleys they lead people down. On another forum someone posted a link to one of Mark's videos--sharpening a card scraper with William Ng. Boy was I surprised, this is a very good video. While I don't sharpen a card scraper exactly the same way William Ng does, I'm absolutely sure he gets exceptionally good results. If you haven't seen this video it's worth watching:

Thanks Mark, we need more information of this quality!

Posted

I took a class in sharping with a local expert and I'll tell you that is the only way I learned to sharpen anything. Reading the books, watching videos - none of it made sense until the instructor watched what I was doing and could tell me what I was doing wrong. and I was doing plenty bad things - with sharping...

and yes that is the best video I've seen on card scraper sharpening.

  • 2 weeks later...
  • 3 months later...
  • 1 month later...
Posted

Here is one tip that I will throw out there. I learned this directly from Leonard Lee of Lee Valley Tools when I worked there many years ago. Use a lighter touch with your burnisher when rolling hour edge. No more pressure than two or three fingers of each hand can apply while holding the burnisher (polished rod type), and only us about half a dozen passes on each edge. The theory being that a smaller hook is stronger and sharper and a large one. I use scrapers allot and this method has always done me well.

Posted

Watching William Ng's video made me get over the uncertainty of card scrapers. I got a few and sharpened them doing what worked for me, but using many of the tips from WN.....I am still getting used to them, but so far so good. I have not had many chances to use them lately, but I now consider them a go-to tool instradof a wishful-thinking tool.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.