Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Router bit goes flying, no one hurt

Featured Replies

  • Author
  • Popular Post

Crowfoot wrench on the 1/2" square drive of the torque wrench.  I found the crowfoot, and I even found a video giving the formula for adjusting the measurement for the different lever length.

But, I can't find anything giving a torque spec for a router collet.  I can find numbers for CNC collets

Does a router in a CNC frame use a different collet than that same router in a table? 

  • Author
On 7/22/2025 at 11:12 AM, Mark J said:

Does a router in a CNC frame use a different collet than that same router in a table? 

  • ER 20 collets: ~59 ft‑lb

  • ER 32 collets: ~100 ft‑lb

  • ER 40 collets: ~130 ft‑lb

My Bora router uses an ER 20 collet, so maybe I'll got for 59 ft-lbs and see how that feels.

If you put a crowfoot 90 degrees to the side of a torque wrench, there is no adjustment factor to worry about.  

https://www.tekton.com/blog/how-to-accurately-use-a-torque-wrench-with-a-crowfoot-wrench

I've never measured with a torque wrench, but 59 sounds about right.

I don't think the stamped wrenches that came with the 690's were over 4 inches long.  The forged wrenches with the Milwaukee aren't very long either-look like the black ones in gee-dubs picture.   

I'll start by saying glad nothing but the cabinet door was harmed :)

Lots of great advice above the the points that clicked big time with me are these:

1. Size of router. While an 1 1/8 bit may not seem that big these bowl bits cut on the side and across the bottom that is a lot of cutter engaged with the wood and A bigger router, especially since you have one, would be a good choice.

2. Speed. I would want to slow the speed using this bit.

3. Collect tightness. While I'm not getting out a torque wrench you want your bits tight.

 

 

 

  • Author
  • Popular Post

I dragged out the Titan TRA001, installed the bit, and cranked down on the collet.  Spent a couple of hours trying to figure out how to adjust the bit height and switch from rack-and-pinion to plunge mode.  Then I plunged in and everything went smoothly.

Thank you everyone for your support!

  • Author
  • Popular Post
On 7/23/2025 at 8:52 AM, Mark J said:

By the way, @Beechwood Chip, what are you making?

It's actually not my project.  A young friend (fresh out of college with a mechanical engineering degree) got a "commission" from one of her friends to make a custom lap desk.  The design calls for indentations to hold a game console and a couple other things.  I'm letting her use my shop for 10% of her commission.  I don't care about the money, but I like mentoring.  And it turns out I learned a lot about routering, so I'm happy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.