Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rockler 3-in-1 Bar Gauge

Featured Replies

  • Popular Post

I picked up a Rockler 3-in-1 bar gauge (aka pinch sticks) a while ago when they were on sale ($30 vs $50 normally). Over the past couple days I used with two of the three ends: the square and the pointed ends. I haven't tried the circle drawing ends yet. I'm using it with two pieces of 18" hardware store 3/8" dowel.

Basically, it works as expected. I was making a drawer and found the square ends useful for taking inside measurements and then using the captured measurements to set my table saw fence or a stop on my miter saw. I found I still needed to "sweep" the gauge to make sure I was measuring the maximum distance, but the square ends got me close, probably close enough for a lot of things. The pointed ends were useful for checking for square.

Given you can make your own version for a few bucks in parts, I think the Rockler version is probably worth it on sale, but I don't think I would have bought it for the regularly priced $50. BTW, I notice they have it on sale again for $36 at the moment. This makes me wonder if they are phasing it out and trying to reduce stock.

PXL_20250725_132459488.thumb.jpg.c83697fa1cf88a7fd92858721a08eef0.jpg

PXL_20250805_134925197.thumb.jpg.97a04628eb717450cc1c0942fefbacfb.jpg

PXL_20250804_141540768.thumb.jpg.02701423b8368d5c43ff3503a4d70b94.jpg

PXL_20250805_135404498.thumb.jpg.d53aadd03ba7d549af5c05cfdb155c95.jpg

 

 

  • Popular Post

I think cost and the fact that you have to supply the dowels makes people think, "I could just buy the dowels and make this myself!".  Plus, you've got the various tips that have to be stored in a container, and the dowels are too long to be stored in the same container.

I suspect that they haven't sold many and are trying to find a price point where people will decide the cost is worth the convenience and coolness vs a home made version.  For me, that would be about $20.  I'd go higher if they had a way to store the extra tips on the clamps.

I use three s/s rulers of different lengths that show 1/32 increments. I use the same one to take my inside measurements and to cut the piece that will fit inside. I doubt that any other means will make my project any more or any less accurate but not to say that Rockler doesn’t have some pretty neat stuff. And then again, with all of my “pretty neat stuff”, I need to cut back on buying more of those items! ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.