Beechwood Chip Posted October 5 Report Posted October 5 Can I use a router plane to create a groove, or do I need to establish the sides and then use the router plane to clean up the bottom? 1 Quote
Popular Post Beechwood Chip Posted October 5 Author Popular Post Report Posted October 5 I got my answer from a Rex Kreuger short on Youtube. Looks like I need to start with a chisel (or maybe an oscillating multi-tool). 3 Quote
Popular Post gee-dub Posted October 5 Popular Post Report Posted October 5 Agree. I use the router plane to flatten the bottom of an already existing groove or dado if required. It really doesn't matter to me how it is started as long s its there ;-) If you're trying to go Neanderthal you could start the groove with a hand plane made for the purpose. Also, my router plane has attachment holes for a fence so you can use it to start the groove as well. I do not have one but there are methods to do the operation with a router plane. 3 Quote
Immortan D Posted October 5 Report Posted October 5 I now use my Stanley #55 for grooves. Before getting that plane, scoring the edges with a hand saw guided by a batten, then using a router plane to remove the waste, was my method of choice. 2 Quote
Popular Post carlpeeter32 Posted October 5 Popular Post Report Posted October 5 I mostly use mine for cleaning up dados rather than starting them, but scoring the edges with a knife first made a big difference for me — it stops the grain from tearing out when the iron gets to the end of the cut. Took me a few ruined edges to learn that one. 5 Quote
gee-dub Posted October 5 Report Posted October 5 On 10/5/2026 at 12:07 PM, carlpeeter32 said: scoring the edges with a knife first made a big difference for me So true. I (almost) always either strike the line with a knife or use a wheel gauge. The resuting clean edge is well worth the few moments of time to strike the line. 2 Quote
Popular Post Botch Posted October 6 Popular Post Report Posted October 6 On 10/5/2026 at 12:43 PM, Immortan D said: I now use my Stanley #55 for grooves. Before getting that plane, scoring the edges with a hand saw guided by a batten, then using a router plane to remove the waste, was my method of choice. Ironically I just saw this afternoon a Paul Seller's "short" where he did this, using either a marking knife or his backsaw; he was using them specifically when there was a knot intersecting the groove. 3 Quote
Popular Post xavierpayne Posted October 6 Popular Post Report Posted October 6 I start grooves with a marking knife and a chisel to establish the walls, then let the router plane do what it does best, which is flattening the bottom. Trying to plow the whole groove with it is slow going. 4 Quote
Popular Post TomBexley Posted October 6 Popular Post Report Posted October 6 For a one-off groove, scoring both walls first and knocking out most of the waste with a chisel seems like the least frustrating route. Once the router plane has a real trench to ride in, it does what it does best and keeps the bottom dead even. Working from both ends toward the middle also helps when the grain wants to tear out at the far end. Trying to make the router plane do all the excavation sounds like a good way to turn a ten minute job into an afternoon lol. 4 Quote
Popular Post Immortan D Posted October 6 Popular Post Report Posted October 6 Nothing beats a plow plane (or a combination plane) when it comes to making grooves with hand tools. A series of indexed grooves I made with my #55: I really enjoyed the process. 3 Quote
Popular Post Tom King Posted October 6 Popular Post Report Posted October 6 I use a 55 a lot of times too. 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.