Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

metal discs to remove wood

Featured Replies

  • Popular Post

I feel pretty sure those are going to be too aggressive and hard to take off exactly the amount you want.  I would use a heat gun and scrapers.  If they are to be painted, some kind of chemical stripper.

  • Popular Post

Agree with "too aggressive".  I use something similar to make fake "live edge" items.  For removing finishes and paints I find Citrastrip to be the least offensive to the operator and the most effective on the finish.  Works pretty fast and is easily neutralized. Just my experience.  Formby's and other high VOC chemical strippers work too but are incredibly strong. I tend to avoid them; I'm exposed to enough stuff already :D

  • Author
  • Popular Post

80 g ro is getting it done. along with scrapers. 

Due to the weight and the doors hang perfect, I will not remove the doors. Or the lock sets. I built the doors 25 plus years ago. I could lift them then.  There are a few carvings that are on the doors and cant be sanded. If I can find some varnish remover. I need about a cup or less and all I can find is gallons at 50 or 60 bucks. The carver told me how the remover should be used.  tricky but doable.

I have low iron now. Keeps me tired. Hopefully resolvable. 3 weeks ago and 2  weeks ago I took 2 transfusions of iron. A very slow process. The doc says I will likely feel better by the end of November. That is when they want to test my blood. So I work only 1 hour a day. And that exhaust me. In  time if the transfusion is working I should start feeling a little better. And resolved in a month. Not a guaranteed plan but I am optimistic.

The one hour right now feels like 6 or 8 hours. Getting old sucks!

 

  • Popular Post

Since 80 grit and the scrapers are already getting it done, I'd stay with that rather than introduce an angle-grinder wheel halfway through the job. Those carbide wheels remove wood so fast that one little hesitation can leave a hollow you spend the rest of the day trying to blend out. For the carved areas, a small amount of stripper worked with a stiff nylon brush or a shaped scraper seems a lot safer than trying to sand the details. Once the finish is off, move up through the grits just enough to remove the 80-grit scratches. No reason to turn seven good doors into a woodworking experiment when the slower method is already working.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.