Popular Post Ron Swanson Jr. Posted November 7 Popular Post Report Posted November 7 I have discovered a guy on YouTube and actually gotten a lot of practical instruction from his videos. He's got a 7-8 part series on dovetails and lots of other content as well. I just cut a DT using a few tips I picked up and the improvement over my usual process is significant. Anyway His name is German Peraire. He's Spanish. He's very good at providing camera shots to show exactly what he's seeing, and is incredibly granular in the level of instruction. Anyone looking for pointers or tips to improve on your hand work, I recommend giving him a shot. 5 1 Quote
Popular Post Ron Swanson Jr. Posted November 8 Author Popular Post Report Posted November 8 Here's the most valuable tip I've picked up so far. I don't think I've never heard anyone else mention this before. But to help saw straight, make sure you're watching the reveal between your saw plate and the work piece. If it's nice and even, you're probably pretty straight. If it's wide on end and closed on the other, you're not. This has paid almost instant dividends. My eyes have always been focused on whatever line I'm trying to follow. It seems kind of obvious now, but I sure hadn't ever really focused on it before. 5 Quote
Von Posted November 9 Report Posted November 9 I've watch Germán's first three dovetail videos and second your remarks - he's got a nice process with a number of tips and tricks, and does a good job sharing it in his videos. 1 Quote
pkinneb Posted November 10 Report Posted November 10 Thanks for sharing I am really enjoying and learning from his video's!! 1 Quote
Ron Swanson Jr. Posted November 10 Author Report Posted November 10 32 minutes ago, pkinneb said: Thanks for sharing I am really enjoying and learning from his video's!! Glad to hear it! Another thing that I've found helpful - If you have to pare your pins, making the "release cuts" at the base of the pin has been very effective in clearing out that corner. 2 Quote
pkinneb Posted November 10 Report Posted November 10 What do you think about angling the boards so you are always cutting straight down? Thinking I might give that a try. 1 Quote
Ron Swanson Jr. Posted November 10 Author Report Posted November 10 44 minutes ago, pkinneb said: What do you think about angling the boards so you are always cutting straight down? Thinking I might give that a try. I think that whatever works, works; and there's no cosmic scorekeeper in the sky keeping track of our methods. Give it a shot! I should probably also mention that for me, one of the more challenging parts of a DT is cutting the pins perfectly plum. My saw really seems to like to drift to the right just a tick. 2 Quote
Popular Post Von Posted November 10 Popular Post Report Posted November 10 2 hours ago, Ron Swanson Jr. said: I think that whatever works, works; and there's no cosmic scorekeeper in the sky keeping track of our methods. Give it a shot! I should probably also mention that for me, one of the more challenging parts of a DT is cutting the pins perfectly plum. My saw really seems to like to drift to the right just a tick. I have this drifting to the right problem with my hand sawing as well. I find taking a big step back with my right foot and then sliding it to the left to make more room for my right elbow to move freely helps. (I'm right handed.) 4 Quote
Popular Post pkinneb Posted November 11 Popular Post Report Posted November 11 Doug I got to the saw plate reflection bit you were speaking of above and agree its a great tip. I think I watched like 3 hours of his video's today. With 5 days to go at my day job my replacement has pretty much taken over so YouTube has been filling some new found down time 4 Quote
Popular Post Ron Swanson Jr. Posted November 11 Author Popular Post Report Posted November 11 10 hours ago, pkinneb said: Doug I got to the saw plate reflection bit you were speaking of above and agree its a great tip. I think I watched like 3 hours of his video's today. With 5 days to go at my day job my replacement has pretty much taken over so YouTube has been filling some new found down time You're about to become very wealthy in the single greatest commodity known to man: TIME. I'm happy for you! (And a little envious) 4 1 Quote
Popular Post Von Posted Friday at 01:39 PM Popular Post Report Posted Friday at 01:39 PM I started episode 8 and perhaps I missed it, but I've just realized Germán is building a jig for making dovetail joints and not just an example piece. Made it more clear to me why he was being such a perfectionist (though I suspect it's his nature). I was fascinated about how he squared the one corner by planing the face instead of the edge. Never would have occurred to me to do it that way. Took me a while to wrap my brain around how he was going about it, though it's simple now that I get it. 3 Quote
Popular Post Ron Swanson Jr. Posted Friday at 09:33 PM Author Popular Post Report Posted Friday at 09:33 PM 7 hours ago, Von said: I started episode 8 and perhaps I missed it, but I've just realized Germán is building a jig for making dovetail joints and not just an example piece. Made it more clear to me why he was being such a perfectionist (though I suspect it's his nature). I was fascinated about how he squared the one corner by planing the face instead of the edge. Never would have occurred to me to do it that way. Took me a while to wrap my brain around how he was going about it, though it's simple now that I get it. Funny you mention this, as I'm midway through building this jig. It's a much more streamlined version of one I built a while back. Though I have no illusions that mine will come out looking as nice. But as long as it does it's job reasonably well. 3 Quote
Popular Post pkinneb Posted Friday at 10:37 PM Popular Post Report Posted Friday at 10:37 PM On 11/13/2026 at 3:33 PM, Ron Swanson Jr. said: Funny you mention this, as I'm midway through building this jig. It's a much more streamlined version of one I built a while back. Though I have no illusions that mine will come out looking as nice. But as long as it does it's job reasonably well. That and his winding sticks are on my short last after the tool cabinet is complete. I'll say again this was a great find for those that are using hand tools. His video's are well done and straight to the point. I really like his presentation and have joined is membership to get additional access. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.