Brice_Arnold Posted September 8, 2011 Report Posted September 8, 2011 Hello fellow woodworkers. I stumbled across WTO and TWW a couple of weeks ago and have been soaking up the plethora of information like a sponge. Podcasts, videos, more podcasts, etc....For the most part, I have been doing woodworking in a vacuum. My interest in woodworking has started to grow into an obsession and I am now looking for more formal education on techniques and design as well as interactions with fellow woodworkers. I am a mechanical engineer by trade/education. I spend by free time doing projects around the house and working in my dedicated machine/wood shop. I have mostly been doing metal work (milling, turning, welding, etc....) but I am slowly focusing more on woodworking. For me there is a need to separate the two due to the nature of the work. However, I would like to work on project designs that meld the art of metal and woodworking. I think there is a lot of potential for pieces where the two can compliment each other. As an engineer, I have a hard time being creative though. Ironically, I find woodworking more challenging than working with metal. Mostly because of the nature of wood. Here are some shots of my current shop. At the moment I am in the process of down-sizing. I basically need to move everything back into my two car garage over the next couple of months. I will be dividing my garage into two rooms to keep the wood and metal work segregated. My biggest concern being the cross contamination of metal to wood and wood to metal. I believe that The cutting fluids used with metal working and on the machines will contaminate wood causing problems with finishing. I basically built out my shop inside of a warehouse where I am renting space. The woodworking side The Metal Working Side Here is a project that I completed last year that is the epitome of my metal working skills. I designed and manufactured this project from scratch. I am not too familiar with Sketch-Up which seems to be the benchmark for woodworking projects. I typically use AutoCAD and Solid Works for design and will probably use this for future woodworking projects. Transmission and Track layout Gearbox machining and assembly Track Assembly Finished Project Anyways, sorry for the long winded intro. Though not woodworking there is some eye candy that hopefully some of you can appreciate. As far as woodworking goes I just finished up a prototype bedframe for our bedroom. For some reason I have to label all my projects prototypes, then I can feel comfortable practicing different techniques on them. For this bedframe I used cheap framing lumber (pine). I milled the boards so that they were relatively straight, flat, and square. Then I constructed the frame entirely using mortise and tenon joinery using the Leigh FMT jig. What a delight that system is. I was able to do all the joints in a couple of hours. Don't know if this is a worthy project but it is the largest that I have done and functionally it is a rock solid bedframe even though it is lighter than most bedframes I have felt. It's got to be the joinery right? In the coming months I will be moving my shop as mentioned and basically starting from scratch. I still need to figure out work-flow and the layout. I am hoping I can get settled in time for the workbench guild build coming up in January 2012 (still need to join the guild). I still need to make a proper woodworking bench (right of passage I guess). I am about halfway through the workbench book by Christopher Schwarz. This is an excellent read. I picked it and started to read the intro and got sucked into it. It's not your typical woodworking book. I guess I am rambling so I will leave it at that. Quote
duckkisser Posted September 8, 2011 Report Posted September 8, 2011 nice shop one question why is your wood lathe mounted that high up on the wall just how tall are you? just kiding im guessing that you take it down when you want to use it. hope you clamp it down the vibration can kill your work. if you going to do more wood working you might want to rearange the clamps to where they are lower down and easer to get a hold of it. but it looks like your shop is very well organized and great space saving solutions so my condolences on losing your curent shop. Quote
Brice_Arnold Posted September 9, 2011 Author Report Posted September 9, 2011 Thanks. I am 6-3 so I don't have a problem reaching my clamps. Though, they do take up a lot of wall space in the new/smaller shop I will be stacking on pegs away from the wall and minimize how much wall space is used up. The lathe is on a lift mechanism that I designed. I will have to get some photos up. In the down position it rests on my miter station table. The lathe weighs about a hundred pounds. I have never really felt the need to clamp it down due to vibration. It doesn't really walk around. I have only done small stuff on it though (pens and 6" bowls). It wouldn't be an issue to clamp it though. I sat down last night and worked out my new shop layout. I think I have a plan that will yield more free space and better work flow. Quote
JerrySats Posted September 9, 2011 Report Posted September 9, 2011 Hi Brice Welcome to Wood talk online , glad you found this place your a man of many talents . I like your lathe setup , would like to see more pics of it . Very cool track system for your truck . Look forward to seeing more of your work . Regards Jerry Quote
TimV Posted September 9, 2011 Report Posted September 9, 2011 Glad to have you join us Brice. Hope to catch you on the chat. Fyi, nice shop and work. Quote
jwatson Posted September 9, 2011 Report Posted September 9, 2011 hello brice, I am a fellow RC'er I flew planes mainly but I have a helicopter and acouple of short course trucks. Quote
duckkisser Posted September 9, 2011 Report Posted September 9, 2011 i plan on making alot of bowls from logs so i will be working with wood that is not balanced and from what i understand there is alot of vibration at the start thats why i mentioned it. but i would love to see your lift system for it please post more pictures. and for you new shop dont forget you have a roof on the garage people always seem to forget they can use the ceiling for storage. in fact one of the better shops i have seen was in basement and just hung clamps on the cross beams so they were right at hand and took up little wall space. you seem to be prity industrious so i would like to know what little ways have you found to keep you shop organized and clean. very clean shop by the way. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.