jpdorn Posted November 23, 2011 Report Posted November 23, 2011 inspired by jay van arsdale's latest dvd, connections, i recently ordered up the necessary components and started playing with one. it's a lot of fun. i wrote up the assembly on my blog (link in sig). any of you guys spent any time with one? i would never argue its convenience over a pen/pencil but the lines it makes are remarkably easy to see and the sumisashi (bamboo pen) doesn't dent the wood like a pen or hard leaded pencil might. just curious if any of you use one regularly.. Quote
duckkisser Posted November 23, 2011 Report Posted November 23, 2011 its cool looking and i can see the use but it also seems akward to use. how does it work? cow do you write curves or letters. Quote
jpdorn Posted November 23, 2011 Author Report Posted November 23, 2011 the left end of the sumisashi is carved to a sharp edge (think marking knife) and the bamboo is split along its length for about 1". that end is used a bit like a marking knife. the right end is just carved to a large point, mashed with a hammer until it's soft, then used a bit like a brush or quill pen. the left end draws lines or marks measurements. the right end is used to mark waste, label parts, etc.. curves you'd need to do with a pencil or pen. this is all according to jay btw. i have about 30mins experience with this tool . Quote
HoboMonk Posted November 23, 2011 Report Posted November 23, 2011 Most of my Japanese woodworking is small furniture, so I don't use my sumitsubo much. I'm building a chumon (middle gate) for our garden this Spring. That might be a good time to bring out the old ink-pot. I do like to use sumisashi, though. I make mine from Kentucky native rivercane, a type of bamboo. Quote
jpdorn Posted November 26, 2011 Author Report Posted November 26, 2011 thanks randy. i was hoping you might chime in. any tips on softening up the brush end of the sumisashi? i've mashed it up fairly well with a hammer but it doesn't seem to be as soft as i believe it should be.. Quote
wilburpan Posted November 26, 2011 Report Posted November 26, 2011 I got my first first-hand look at using a sumisashi at WIA at Jay Van Arsdale's seminar. The end of his sumisashi is pretty firm, even with the hammer mashing. There are cuts in the end to make it brush-like, but I think that their main purpose is to serve as a reservoir for the ink. Think about using a marking knife against a straightedge to strike a line, and you'll get a better idea of the feel of it. Quote
HoboMonk Posted November 27, 2011 Report Posted November 27, 2011 thanks randy. i was hoping you might chime in. any tips on softening up the brush end of the sumisashi? i've mashed it up fairly well with a hammer but it doesn't seem to be as soft as i believe it should be.. Shave the edge to a thin point, make as many little knife splits as possible, then soak in water overnight before gently crushing with a smooth-faced hammer. Quote
jpdorn Posted November 27, 2011 Author Report Posted November 27, 2011 i'm talking about the blunt (brush) end, not the beveled (knife) end. are you guys as well? Quote
wilburpan Posted November 27, 2011 Report Posted November 27, 2011 Got it. You're referring to the right end of the sumisashi in your picture? Sorry I missed that. This was also pretty firm, and came to a point, although maybe not as sharp as the left end. Jay used it mainly to make marks indicating the waste side of the joint being cut. But it was still much more like using a thick pencil than a brush, due to the firmness. The closest thing I can think of to compare it to is a really firm Sharpie marker, and even probably a bit more firm than that. Quote
jpdorn Posted November 27, 2011 Author Report Posted November 27, 2011 ok. yeah he does the same in his 'connections' dvd. a firm sharpie is a good description. he even breaks out an actual sharpie when he needs another color. i've seen a video of a japanese carpenter laying out joints on a beam with a sumisashi and it was much softer, more like a brush. he was labeling parts with kanji which would obviously require more of a brush like flexibility. just thought i'd give it a try. i'll post if i come up with anything. thanks guys. Quote
HoboMonk Posted November 27, 2011 Report Posted November 27, 2011 ok. yeah he does the same in his 'connections' dvd. a firm sharpie is a good description. he even breaks out an actual sharpie when he needs another color. i've seen a video of a japanese carpenter laying out joints on a beam with a sumisashi and it was much softer, more like a brush. he was labeling parts with kanji which would obviously require more of a brush like flexibility. just thought i'd give it a try. i'll post if i come up with anything. thanks guys. Here's an example of a Sumisashi that I made from a piece of bamboo. The brush end (smaller end) is made by scraping off the hard outer sheath of the bamboo, then shaving it down to a wedge shape. I use a razor blade, but a sharp chisel is more traditional. I then soak the exposed tip in water overnight then gently smash it with a hammer and anvil. The sumisashi is resting on one of my small bonsai tables. The inkstone and sumi block in front of the table are about 40 years old, left over from my calligraphy days. The burnt hole at one end of the sumisashi serves two purposes: * It's for hanging the sumisashi on a nail. * It's where I rest my thumb when I'm using the brush end. Hope this helps. Quote
jpdorn Posted November 27, 2011 Author Report Posted November 27, 2011 ah! that looks perfect. thank you randy. i'll give that a shot tonight. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.