rpike Posted November 26, 2011 Report Posted November 26, 2011 I'm looking for ideas... I have a lot a free time at work and would like to take advantage of the time away from the shop. Since I can't be cutting wood I figured I may as well be sharpening my tools so they're good to go when I get back to the shop. I'm trying to come up with a good idea for a tool box I can build that I can keep my sharpening stuff in and also put a couple of planes in to take to work with me. Anyone out there have something like that they'd like to share? Quote
wilburpan Posted November 26, 2011 Report Posted November 26, 2011 I don't have anything like what you describe, but if I were to make something for this purpose, I'd make a box with the bottom sized to hold your sharpening system comfortably (in my case, three waterstones and a diamond plate for flattening), and then put a 1/2" piece of plywood over that, which should serve as a platform to store the couple of planes that you want to take to sharpen. Size the total height of the box to fit your sharpening system and your tools. Quote
derekcohen Posted November 27, 2011 Report Posted November 27, 2011 I have a sharpening kit that I use when I demonstrate at woodshows or workshops. It is made up of a couple of cast iron plates (from the soles of old planes - but a piece of hardwood would work as well) and used with diamond paste. 40u (microns) for use when flattening a blade back or creating a new primary bevel. Then a kit of 10u, 3u and 0.5u for sharpening. Diamond paste is cheap. Smear it into the surface, wipe off the residue, and you have a reasonably clean setup. Regards from Perth Derek Quote
nateswoodworks Posted November 29, 2011 Report Posted November 29, 2011 Derek, where do you get your paste? With standard honing does it last long or do you go through a lot, I know it's kinda relative. I have always been curious. Nate Quote
CessnaPilotBarry Posted November 29, 2011 Report Posted November 29, 2011 I carry my waterstones in the same Rubbermaid container I store them in. They get wrapped in a light towel to stop them from banging together when traveling. At the destination, simply remove the towel, fill the container, and work. When done, drain the container, put everything back, and travel. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.