Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Understanding Guild Build

Featured Replies

So I am 100% all in but I would like to better understand how things will go when the build begins.

Jan 2 is the "go date", so...

Do we all bring our computers into the shop and build live with Marc?

I know there are videos of all the steps are they posted on Jan 2?

How exactly does a guild build go?

The reason I am asking is that I am going to be off work the 1st week or so in January and want to know just what am I going to do to go along with the build during the first 1 or 2 weeks.

Stephen.

HI Stephen,

Welcome. I've been a Guild member since day one. This will be the first time that I've done the build, though I always follow the videos and process for education, community and entertainment. The build is not a literal build along, as Marc's videos are not in real time. [He may have the shop cam going on occasion, never have tuned in for that.] The videos are posted once a week and are edited. Lots of good info, and usually all steps identified and discussed but not shown. For instance he'll show one leg but not all. Some steps may be shown at high speed. Most, even right on top of it builders will lag the videos to take advantage of the info in planning and execution. Weekly videos are supplemented by some Q&A sessions and supplemental blogs and clips as warranted. Some guild folks will forge ahead of the process if their time and ambition allow. They'll still tune in just to be able to nod their heads knowingly, or to see where they could have done something differently.

Many options available to you. While I am anxious to do this once Marc's video releases begin to appear, I may have to wait as I'll be limited in shop time after a late December surgery. Hopefully, in a few weeks I'll be able to shuffle around the shop, but probably not be up to handling big and heavy work pieces in my tight quarters. We shall see.

Have fun and wishing you the best with your own workbench build.

I would imagine the first couple videos will be focused on the design, wood selection, alternatives, preparation, etc. So I'm not planning to start until closer to February. I intend to stay a week or so behind Marc's videos as long as I can restrain myself from jumping ahead. A huge benefit of being a guild member is letting Marc iron out the kinks so you don't make as many mistakes. Considering the scale and cost of this project, I'll be taking every opportunity to avoid having to do things more than once. :)

Maybe during your week off you could spend some time choosing boards and milling to rough dimensions.

  • Author

Tom & Eric, thanks for the above clarification. The videos should be as or more informative than the others on the free portion of his web site. I like the idea of lagging behind to gain from the knowledge of those who feel more familiar with this type of build and forge ahead.

Tom, I hope your recovery is quick so you can get back at the build.

Stephen.

Thanks for the excellent explanations of the guild build process guys. Couldn't have said it better myself. Stephen, the best thing you can do if you want an idea of how the build will go is to check out the previous builds. Look at the release dates of the videos and you'll see we pretty much drop one video per week. So as indicated above, the first couple videos are devoted to general info like wood selection, prep, history and stuff like that. If I were a Guild member, I would aim to start about one month after the first video release. This gives you a chance to see what I do and then read the fallout from the rest of the Guild. Many times, we come up with better ways of doing things in the comments section. :)

This build is a little different in that I started the conversation very early. Most times, we don't really begin talking about the build details until about one month prior to the start. But given the scale and cost of this bench, I figured we would need to give people as much advanced notice as possible. So for some folks, its going to feel like a "hurry up and wait" situation.

I would also suggest you download and watch the videos from a previous build. It will give you and excellent feel of how a build progresses.

==> feel like a "hurry up and wait" situation

Given the size of the components, I’m using the ‘hurry-up’ on pre-milling the top.

To manage moisture of the thick stock, I’m planning to use the extra weeks to rough-mill the stock for the top, let it sit for a week or two, then work to final dimensions just prior to glue-up. Just an idea, but that’s my plan. I’m also starting with 12/4, so going to work at a slow pace to prevent back strain and mistakes – not like I can just grab another stick from the scrap pile. I figure the extra time is well spent prepping for the top glue-up and pay off in the flattening stage …

To manage moisture of the thick stock, I’m planning to use the extra weeks to rough-mill the stock for the top, let it sit for a week or two, then work to final dimensions just prior to glue-up. Just an idea, but that’s my plan.

hhh, by "rough mill" do you mean the intermediate step between the mill's skip-plane and edge ripping and final dimensioning? I'm considering doing the same - though my stock is mostly 8/4 (I did buy some 12/4 walnut for the end cap and leg vise chop). Given their thickness I may rough dimension those this coming weekend and then (like you) final dimension closer to the build date.

I also noticed the "gravity" of using 10 foot long boards of 8/4 ash (12" wide). Lots of huffin' and puffin' that day!

One thing to keep in mind with these long boards is that they will probably bow no matter what you do. Even a little pre-milling will result in at least a little bowing after a few weeks. Just the nature of the beast with this long stock. So keep in mind that after that pre-mill, you now have even less stock to work with when it comes time to do the final milling. So for some, it might be better to simple mill the boards down and get them glued up as fast as possible. Once they are glued together into a big slab, they should be more stable than when sitting all alone. And if your stock is purchased kiln dried locally, there probably isn't a whole lot of acclimation needed. Just be sure to mill it equally on all sides and you'll stack the cards in your favor.

==> they will probably bow no matter what you do. Even a little pre-milling will result in at least a little bowing after a few weeks

Agreed. I expect it to bend and the bend to provide me some useful info -- did a large stick build once before and found it helped me find the best final orientation after seeing what happens. Starting with rough stock that when milled with give 12/4, so just taking down the mill cuts on the 4 faces to see 'what is what' -- makes evaluating the stock a better bet. Probably up to -- maybe 3/32 - 1/8 should get most of the rough milling under control.

Rough stock sealed at the ends - so will take a few there about an inch past the checks.

I tried for 12/4 q-sawn, but could not source it. Last time I did something like this, q-sawn was more available.

  • 4 weeks later...
  • Author

Well for such a new guy to all of this I want to thank everyone. I am learning a ton in terms of strategic approach and what to potentially expect. I just got my Duglas Fir into the shop and it is already within .5 - 1% of the moisture content of all the wood thats been in their for 6 months plus.

I do like the idea of rough dimensioning one boardo see how it moves so I understand how to use the wood to support stability.

Stephen.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.