Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cradle for my god son

Featured Replies

  • Popular Post

Hey everyone,

This project turned out to be quite the fiasco! As it began, I had just moved into a new house, and my one car garage was(and still is) in shambles, all of my tools are scattered across the floor and piled on any flat surface. On top of that I have one outlet, which tested my patience at times. Any ways, the woods I chose for this cradle were african mahogany with a lot of ribbon slice, curly maple for the raised panels, and 8/4 hard maple for the legs. The cradle itself features 28 mortise and tenon joints. The mortises were hogged out with a forstner bit on the drill press, and cleaned up chisel style. The tenons were cut oversized on the bandsaw and later walked in to proper size by hand. The raised panels were veneered with mahogany and cut on the table saw. The panels were pre finished before assembly and inserted into the grooves with spaceballs to allow for expansion and contraction. Curves cut on the bandsaw then rasped for a smooth even surface to run your hands over. Stained with english chestnut, and sprayed with dull rub effect cab acryllic laquer(dont worry, it had plenty of time to cure and gas off). The maple legs and feet were joined with dowels. They were cut to rough shape, smoothed out with a rasp, they rounded over with a 3/4 roundover bit, then some extensive sanding. The stretcher is held with screws so that the cradle can be disassembled into 4 pieces without headache. Oh yeah, and the cradle is attached with pivot hinges so it rocks smoothly and quietly. I was shocked at how sturdy it is, it is incredibly strong, it can support a giant baby and I'd bet a dollar on that =)

post-3732-0-76090900-1324337021_thumb.jp

post-3732-0-43691400-1324337084_thumb.jp

post-3732-0-48327500-1324337125_thumb.jp

post-3732-0-56288400-1324337133_thumb.jp

post-3732-0-54896000-1324337139_thumb.jp

post-3732-0-97573200-1324337145_thumb.jp

post-3732-0-15851300-1324337163_thumb.jp

post-3732-0-97581900-1324337172_thumb.jp

post-3732-0-76775300-1324337181_thumb.jp

Wow, that is nice. Scary to think what you could have done, if you had more outlets :D

  • 4 weeks later...

'Tis nice.

I find myself wishing for even more curves. (I know how long those legs must have taken, so I hesitate to ask.) Whimsical and sensual at the same time, the legs are so delightful that, to me, they steal the thunder of all the wonderful mahogany joinery you did for the carriage.

Again, though, lovely piece.

  • 2 weeks later...

Awesome project Freddie! Your own design? I really like the sculpted legs. I'm sure the recipients were pleased to accept this gift! Again, great job!

  • Author

Yes brian this was an original design, as far as I know haha

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.