00101 Posted January 6, 2012 Report Posted January 6, 2012 I'm looking at a used and *hopefully* slightly damaged Hitachi CB75F. I need to negotiate a price as well as get an answer to how damaged it actually is since the angle that they took the picture in addition to the way the sheet metal has been damaged leads a possibly forced perspective on the angle of the upper part of the saw. It says that the blade guide is still 100% and that the sheet metal was damaged, which if that is the case is a relatively easy if ugly fix. It'd have to be a 1.5 hour drive to go and get it, which in of itself isn't a huge problem but its ~$40 in gas so it is something to consider as well. Also, looking at some of the info on the saw it says that it takes a 3" blade, and myself never having owned a band saw will I be able to use narrower blades for curves and whatnot. So basically would it be worth my money and time and what should be my maximum offer on something like this. Quote
rmac Posted January 6, 2012 Report Posted January 6, 2012 I'd make them send me some better pictures before I went to look at it. From the pictures you have, it looks like the spine is bent, which seems like it would be a deal breaker unless you have some heavy-duty metalworking skills. -- Russ Quote
00101 Posted January 6, 2012 Author Report Posted January 6, 2012 I'd make them send me some better pictures before I went to look at it. From the pictures you have, it looks like the spine is bent, which seems like it would be a deal breaker unless you have some heavy-duty metalworking skills. -- Russ That's what I initially thought looking at just the first picture, but if you look at the second, the mouth opening thing seems to be pretty square. And looking closer at the first picture in relation to the second you can see the sheet metal is blown out down and to the right which in conjunction with the crappy angle really makes it look like the spine is bent. That's not to say it isn't, but it really is hard to tell. And I definitely don't have the skills nor the tools to fix the spine on any band saw much less this thing. Quote
Onboard Posted January 6, 2012 Report Posted January 6, 2012 I agree with Russ. I would definitely want additional pictures. If the seller can open the upper and lower side covers and take a few shots, that would be nice also. Here’s a picture (below) that may or may not be of much value, but it is the saw in new condition for comparison. Also, here is a company that sells parts for this saw. Take a look at the exploded drawings on the left which will show what parts are hidden by the damage. This website may also be good resource for repair if you ever do purchase the saw. By the way, I’m pretty sure this is the bandsaw that Norm Abram used on some of his early programs for resawing. He used the 3” blade as well. The second picture is the 3” blade to give you a sense of scale. Quote
tim0625 Posted January 6, 2012 Report Posted January 6, 2012 I agree with everybody! Cover off and close up pictures. In the left hand picture, it looks like the cover is bent - from the yellow tag going upward and to the left. That means someonw pushed on it firmly trying to close it but it wouldn't because....maybe the spine is bent? broken? It looks like it's been dropped on the top left corner. If the spine's compromised, personally, I'd run, I have metal working skills and wouldn't want to tackle this because in repairing the spine, you're trying to get the wheel alignments right to make the blade run true. Craigs list has too many bandsws out there in good working order to take such a chance IMO. Let us know what you decide. Quote
TimV Posted January 6, 2012 Report Posted January 6, 2012 If it were me, I'd stay away from it. It was obviously knocked over. The covers are usually closed so if it was knocked over or dropped while moving and bent the sheet metal guard surely the back spine was bent also. For the 1-1/2 hour drive (3 hrs both way), I'd forget about it. Quote
Jfitz Posted January 6, 2012 Report Posted January 6, 2012 I understand the perspective might exaggerate the extent of the bent metal, but even so - given how much the upper section is bent out of shape, I just don't see how the spine cannot also be bent. Did the seller indicate how it was damaged? Quote
mikem Posted January 6, 2012 Report Posted January 6, 2012 I have to agree with the others, I would look at another saw. There is a reason that there is damage, and who knows what underlying damage there is that you can't see. Its not worth the long drive or frustration. Quote
dwacker Posted January 6, 2012 Report Posted January 6, 2012 Those were nice heavy machines in their day but the spine on that saw is wasted. I wouldnt even think about for anything other than spare parts or scrap metal. Don Quote
Jfitz Posted January 6, 2012 Report Posted January 6, 2012 I just found the CL ad for that saw, which states it "Fell off of truck". I doubt a fall of a truck would only damage the sheetmetal. Given it's a "make a deal" listing.....I would definitely shy away. Quote
Onboard Posted January 6, 2012 Report Posted January 6, 2012 I looked at the exploded parts diagram in the link I put in my comment, and in the second diagram down, it shows the main structural support which includes the “spine” being referred to. That piece does not have a part number, so you couldn’t purchase a replacement if you wanted. I also noticed that if one or both saw wheels were damaged, it would cost $564.79 each to replace them. Even if the “spine” is not damaged, depending on how much the wheel housings and wheel covers are damaged, you’ll find that they are a pretty expensive replacements also. Just some thoughts. Quote
00101 Posted January 8, 2012 Author Report Posted January 8, 2012 Alright so that one seems like a bad idea. I was looking at this one ($375, ~1.25 hour ride one way), and while the rusty table does concern me, how bad does it actually look? Its got a brand new $500 dollar motor which may or may not mean much and a 12" vertical and 24" to the spine. So its plenty big for anything I would do with it. Quote
Jfitz Posted January 8, 2012 Report Posted January 8, 2012 I'm certainly not an expert on restorin old machines, but I think that table would be pretty easy to clean up. Quote
wilburpan Posted January 9, 2012 Report Posted January 9, 2012 Any info on the maker of that saw? I would certainly get out there and take a look at it. Don't worry about the table. That's easy to clean up. Quote
tim0625 Posted January 9, 2012 Report Posted January 9, 2012 $375...he may take $300 or $325...either way, not a steal but not a bad price IMO...ball bearing blade guides and 24" deep to the spine - that's good...Naval jelly and steel wool will make the table new again. How much HP does this $500 motor have? Like WilburPan said, ask for a make and model before making the offer. Quote
00101 Posted January 10, 2012 Author Report Posted January 10, 2012 He says he doesn't know the model, but the motor is a 3hp 115v or 220v single phase. Quote
00101 Posted January 10, 2012 Author Report Posted January 10, 2012 Well I think I'm going to try to make an offer at $325 and see from there. Quote
TimV Posted January 11, 2012 Report Posted January 11, 2012 It looks like the machine was repainted at the least. He's probably not the original owner and it may have been painted prior to him, that's why he doesn't know the maker. I would recommend going to the forum at owwm.org and joining. You can post a picture and request the experts there to help identify the maker. It looks similar to a Cresent machine but there were lots of copies. They will definately be able to help you. Then you can find out if the offer is worth it. I frequent that forum regularly and they have helped me with rebuilding several old machines. Quote
tim0625 Posted January 13, 2012 Report Posted January 13, 2012 Well I think I'm going to try to make an offer at $325 and see from there. He may take $325 but offer him $275 and see what he says. Quote
Darnell Hagen Posted January 13, 2012 Report Posted January 13, 2012 It has Crescent lines, but I don't think it is a Crescent. That stand makes me think it's a combination machine. $500 for a 3hp is pretty steep, it better be a Baldor or a Leeson for that money. Personally I don't think I'd go any higher than $250, but I'm a bottom feeder and it would suck to drive for two and a half hours and come home empty handed. I'd need more, better photos before I even made the drive. Quote
00101 Posted January 21, 2012 Author Report Posted January 21, 2012 Well unfortunately I was late with my offer and the saw was sold. Figured I had more time since it had just been sitting there for a month, but such is life. Do any of you know anything about the Delta 28-141? All I can find is replacement part dealers and no information on it. The saw looks like new and is listed for $285, plus the cost for a riser block. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.