Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Is extended use of the Domino ok?

Featured Replies

I am working on a project that has given my Domino its first good workout. i attached the trim stop and had to batch out more than 60 mortises in the vertical slats alone. i didn't want to continuously run the domino that long, so i broke it up into a couple of batches with a cooling session in between. is it hard on the domino to run for extended periods like this?

Good question - I wonder myself. I'm attending a Festool training later this week - I'll try to remember to ask them! Cool.

The Domino will shut itself down if it starts to overheat so you shouldn't have to worry. I know I've done a ton of mortises in a row with no problems in an Arizona summer (so I'm starting a few degrees warmer than you :)

Another thing to remember is that while it is oscillating between mortises, it is cooling since the oscillation bring in air through the back plus the air the vac is drawing..

  • Author

Morton, lemme know what they say. That's awesome timing! Good to know, Paul. You are always a wealth of festool knowledge!!! Thanks fellas!

They do just fine for a big job here and there. They will not hold up for production but I dont think they had production in mind when they were designed. I can get about a year out of a Domino before it dies. Last one made it 6 months but was well loved for the full six months.

Don

  • Author

They do just fine for a big job here and there. They will not hold up for production but I dont think they had production in mind when they were designed. I can get about a year out of a Domino before it dies. Last one made it 6 months but was well loved for the full six months.

Don

wow, that's kind of disheartening :( i have to say, that's not as good as i expected

So given the 1+2 warranty, you could have had a new one shipped to you after those 6 months; warranty typically restarts on a replacement meaning if you killed them every 6 months, you'd just get a new one every 6 months. I've used mine for hours in a stretch and it doesn't so much as get warm. Were you mortising granite?

  • Author

The only part I notice that gets warm is the piece of metal on the underside that oscillates. I assume this is normal as movement will create heat.

The only part I notice that gets warm is the piece of metal on the underside that oscillates. I assume this is normal as movement will create heat.

The gizmo that makes it a domino will break down under normal usage and start making eggs. Just like any other small handheld power tool they do go bad eventually. Usage is relative to what you do. Just looking at the 5x30 usage. In 2009 my 5x30 purchases were 26 boxes, 2010 27 boxes and 2011 14 boxes but I only worked half the year. Ive pruchases 5 Dominos since 2009, 1 burned up in shop fire and one i use today. Thats three used up since 2009. The way I see it is if a tool get used up due to normal wear and tear Im making money off the tool, not such a bad thing.

Don

  • Author

The gizmo that makes it a domino will break down under normal usage and start making eggs. Just like any other small handheld power tool they do go bad eventually. Usage is relative to what you do. Just looking at the 5x30 usage. In 2009 my 5x30 purchases were 26 boxes, 2010 27 boxes and 2011 14 boxes but I only worked half the year. Ive pruchases 5 Dominos since 2009, 1 burned up in shop fire and one i use today. Thats three used up since 2009. The way I see it is if a tool get used up due to normal wear and tear Im making money off the tool, not such a bad thing.

Don

Don,

Do u have a cabinet shop or some sort of production shop? That's a ton of 5x30 dominos!

Don,

Do u have a cabinet shop or some sort of production shop? That's a ton of 5x30 dominos!

Yes I do cabinets and furniture full time, pays the morgage. I started using 5x30's instead of biscuits a few years ago.

Don

==> Its not a production tool

+1

It's a good tool for hobby, installer, small cabinet shop, etc. Not industrial.

I just read the Festool warranty. The user is described as "consumer"...

Of course, I don't expect such a tool to stand up to an environment like the Stickley factory floor, but it seems like they left wiggle room out of any professional application. That's kind of lame for an $850 bare tool.

I just read the Festool warranty. The user is described as "consumer"...

Of course, I don't expect such a tool to stand up to an environment like the Stickley factory floor, but it seems like they left wiggle room out of any professional application. That's kind of lame for an $850 bare tool.

Ya but its such a cool tool you cant beat the price. I was sort of skeptical when they first came out and really only bought my first one to do a large louvered cabinet door job, after using and abusing them for awhile I wouldnt go without.

Don

No doubt about the cool! My disappointment was that I've seen sub-$200 DeWalt biscuit joiners last years in daily shop use, with only blade replacement.

It would be cool if Festool, not free, for a reasonable charge... offered some sort of a "wear and tear" rebuild kit for the pro user.

No doubt about the cool! My disappointment was that I've seen sub-$200 DeWalt biscuit joiners last years in daily shop use, with only blade replacement.

It would be cool if Festool, not free, for a reasonable charge... offered some sort of a "wear and tear" rebuild kit for the pro user.

The only buscuit joiner Ive owned that lasted longer than a year or two was a Lamello, at the time cost nearly as much as a domino does today. Im sure Festool could easily repair a used up domino. It just makes better sense to depreciate it and pick up a new one rather than deal with the hastle especially if you need it daily.

Don

Festool does have a really cool repair department in Indiana that'll take stuff back in for repair. Yeah - a lotta shops are burning up dominoes and other tools - but as dwacker says - they are making money doing it and there's nothing better. Those production environments can get downright crazy in terms of tool usage and tool using-up ;)

To answer the original question, I asked Brent Shively a Festool Applications Specialist. He said this:

"You will have no problems running the domino for that length of time or longer [few hours]. The motor may feel warm but it will not damage it in any way."

  • Author

To answer the original question, I asked Brent Shively a Festool Applications Specialist. He said this:

"You will have no problems running the domino for that length of time or longer [few hours]. The motor may feel warm but it will not damage it in any way."

fantastic! thanks for asking that for me Morton

I broke a little coupling on my Domino last night, it tightens the fence tilt. Called Festool repair and they guy was very helpful, said it was covered under warranty even though I bought the machine second hand and it was the original model with the round spring pins in front. He said it would go out Monday, but when I offered to pay for next day shipping he said he would walk it thru and send it out today! I over-tightened the pivot so paying to ship a free part seemed reasonable to me!

Nice to see customer service is still alive!

Ya but its such a cool tool you cant beat the price. I was sort of skeptical when they first came out and really only bought my first one to do a large louvered cabinet door job, after using and abusing them for awhile I wouldnt go without.

Don, you burned up three in two years, and still consider it to be indispensible. If that is not an endorsement, then I don't know what is!!!

Don, you burned up three in two years, and still consider it to be indispensible. If that is not an endorsement, then I don't know what is!!!

After years of using a horizontal slot mortiser the domino is definatly faster. The ability to make louvers alone pays for a domino real quick.

Don

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.