duckkisser Posted January 31, 2012 Report Posted January 31, 2012 trying to put a grinding wheel on grinder and it wobbles from side to side. its a norton white 8 inch wheel. I have rung it sounds true no cracks. could the plastic inserts be put in going the wrong direction? i know alot of times that it just needs to be trued up with a dressing tool. is there a way to make shure it is the wheel and not something i am doing? going to try puting pencil on surface to see if there is any differences in the outside edge othere wise it might be that there is a density problem in part of it. other then seeing if the same dirrection is always going up cant think of how to check to see if there is a problem with wheel. anyone has any idea please help Quote
tim0625 Posted January 31, 2012 Report Posted January 31, 2012 Someone on WoodTalk had the same problem a few months ago but I don't remember the outcome. Quote
duckkisser Posted January 31, 2012 Author Report Posted January 31, 2012 figured it out after a couple hours one of the maintance crew came through held a pencil to the side and showed that it was only making contact about half way so it was not a flat stone. now i have to pay to ship it back so my 34 doller stone is going to cost me over 40. at least the woverine jig works any advice how to work it any turners out there? Quote
over40pirate Posted February 1, 2012 Report Posted February 1, 2012 I would call the place where I bought it, and explain the problem, and tell them you want it replaced. If they say to send it back, tell them you would like them to send you a prepaid shipping label. If they say no, ask for a superior. Quote
tim0625 Posted February 1, 2012 Report Posted February 1, 2012 ditto the pirate - arrr....Some places will say it's not worth shipping - just keep it and we'll send another. Get someone in charge. Quote
Darnell Hagen Posted February 1, 2012 Report Posted February 1, 2012 If the arbour isn't bent, and the flanges are straight, and paper gaskets were used in its installation, the wheel is garbage. Pull it immediately to avoid it being used. You don't want it coming apart at high velocity. If your supplier agrees, the most cost effective solution for the defective wheel is to smash it with a hammer and throw it away. Nobody should have to pay to ship trash. Quote
over40pirate Posted February 1, 2012 Report Posted February 1, 2012 If they insist on you paying to ship it back (very unlikley) tell them, you will use it as is, even though it may be dangerous! Then say" you do have liability insurance, right?" I agree, they will tell you to throw the orig. one in the trash. Quote
tim0625 Posted February 1, 2012 Report Posted February 1, 2012 "Oh Lord...he used the L word...yes sir...we'll ship you another immediately." Quote
duckkisser Posted February 1, 2012 Author Report Posted February 1, 2012 hahaha liablilty reminds me of when i was looking at a car.....guy was test riding a car and the dealership was testing his car for a trade in and when he came back he was ready to go. the sales man said oh cant seem to find your keys while we look for your keys ill tell you more about that car. the guy said ok just let me use your phone for a second..........picks up the phone dials and says police i want to report a stolen car. his car keys showed up real fast Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.