Recommended Posts

Posted

New to hand planes, just picked up a Lie-nielsen rabbit block plane and Im looking to get the LA jack plane. The question is can I use it for jointing or should I get the no. 7 jointer plane. Can only afford to get one of them at the moment.

Posted

The LN low angle jack is an excellent choice for all around use. The jack size is both an adequate jointer and smother and with a low angle blade it shoots well, too. If I had to choose one plane to do it all it would be the 62, and I've sold more of them than any other plane because of it's versatility. Pick up a couple extra blades when you order.

Posted

The LN low angle jack is an excellent choice for all around use. The jack size is both an adequate jointer and smother and with a low angle blade it shoots well, too. If I had to choose one plane to do it all it would be the 62, and I've sold more of them than any other plane because of it's versatility. Pick up a couple extra blades when you order.

Darnell, can you expand on why you suggested a couple of extra blades? And what different ways would you set up those blades to help quantify "couple."

Thanks

Posted

The beauty of a bevel up plane is that the cutting angle is determined by the honed angle of the iron, as opposed to the bevel down where the cutting angle is determined by the frog. Low angles are easier to push, high angles are less prone to tearout. The 62 has a 12* bed, so for the standard 45* cutting angle an iron with a 33* bevel would be used. If you are experiencing tearout, a 43* bevel will raise the angle to 55*. If you are shooting, a 25* bevel will reduce the angle to 37*, and make end grain easier to slice. Really challenging woods may require a scraping bade to be used, or maybe even the toothed blade to prepare the surface for smoothing. It really depends on how you are using the plane, and on what kinds of wood to determine what irons to purchase. To start I would pick up a 25* for shooting and a 33* for planing. If that produces tearout a higher angle is easy to hone, but reducing the angle is a pain.

Posted

+1 on everything Darnell said. The LN # 62 is awesome - the new Stanley sweetheart, not so much. I will say that I read online that Garrett Hack says that all his low angle plane blades are set at 25 degrees and as long as you set the mouth small enough there is no need for other grinds to stop tear out on figured wood...I know, I know...its just what I read. Hoping to meet him next month and want to ask that questions because its definately not what I've seen before. Everything I've read says to follow Darnell's advice.

P.S. Garrett didn't write this, someone that took a class from him claims he said it.

Posted

Just an awful tool. If anyone has one, do yourself a favor and send it to me so that I can dispose of it properly.

The maker even warns in the instructions that "Bronze and brass alloys contain lead, a chemical known to the State of California to cause cancer and birth defects, or other reproductive harm."

Despite this fact, I will not even charge you a fee for disposal of the hazardous materials. Heck, I will even cover the shipping costs for you just to have the piece of mind that this dangerous piece of equipment is safely removed from your home and can no longer endanger your loved ones

What a deal :P !!!!

Posted

62 is a beauty. I went to a L-N tool show with the same disposition you describe--new to handplanes, not sure where to start. They walked me through it with the 62 and I used it for all my planing needs for about a year....now I have a full complement of planes (jointer, smoother, plow, shoulder...partially out of tool lust), but the 62 is still my favorite.

Couple of additional thoughts. Go to L-N show if you can. They have them almost every weekend it seems...they're free and you can try out all of their tools. Plus, they'll teach you stuff for free--including sharpening. If you can't go to a show, try their youtube channel--tons of great, free, content.

Finally, Christian Becksvoort reviewed the LA Jack in Fine Woodworking a while back and made the case for it being the only plane you need. Issue number 217 (http://www.finewoodworking.com/ToolGuide/ToolGuidePDF.aspx?id=33799)

Posted

Just an update.

For one the LA rabbit block plane from LN is amazing, really nice having a block plane that the blade runs from one end to the next.

To the LA LN Jack Plane, this thing is a work of art, truly well made and simply Beautifull. I went to lap the sole and it was dead on, i touched up the the blade a little before i even used and on my first board it was cutting transparent ribbons. Overall it is a work of art, and not to mention the excitment of opening the box alone is great. Not to mention very welkl packaged for shipping.

The 4 1/5 Smoother is on its way now, im addicted.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 46 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined