wilbur Posted March 4, 2012 Report Posted March 4, 2012 i recently ordered a delta unisaw w/ the 36" biesemeyer fence... i got a call a few days later saying the 36" setup might be on back order, and they offered me the floor model they have onsite. i'm wondering if there are any downsides to a floor model saw of this type? or are there some elements i should check out in the offered saw before agreeing? the floor model is from a woodcraft, and i don't think it's ever even been plugged in... my instinct is to think that this is a lifetime saw, and there's nothing wrong with a floor model even if it had been used for a couple demos... but i wanted to put it up for debate. thanks Quote
Beechwood Chip Posted March 4, 2012 Report Posted March 4, 2012 When I got my Sawstop from Woodcraft, the extension table they gave me was a return that had never been used. But, it was missing the hardware pack. It actually took a couple of weeks and several trips back and forth to Woodcraft to get it all sorted out. By that time my "I can't wait to try out my new saw!" had diminished quite a bit. I'm not saying that you will have any trouble, but the next time I make a major purchase like that, I'm going to check that everything is in a factory sealed box, or that I'm getting a substantial discount for a "floor model" or "refurbished" unit. If you do get the floor model, I'd get out the manual and make sure that that you have all the parts before you take it home. Ironically, I've bought refurbed units and been very happy. They come in a factory sealed box, and someone has checked that they have all the right parts. Quote
Eric. Posted March 4, 2012 Report Posted March 4, 2012 I wouldn't have a problem buying a floor model...as long as it was deeply discounted. If I'm forking out MSRP, I expect brand new, factory sealed equipment. But I'm much more hesitant buying refurb stuff than floor model stuff. Quote
Jason White Posted March 4, 2012 Report Posted March 4, 2012 The main drawback with a floor model/demo unit is that you never know if the person who assembled it knew what they were doing. It could be missing parts, damaged, etc. Also, transporting a fully or partially-assembled tablesaw is a major PITA! Personally, I enjoy assembling my machines from scratch because it gives me a a better understanding of how the machine works, proper adjustment, etc. That said, I have personally assembled two contractor saws and two cabinet saws and it gets old really fast! Jason 1 Quote
wdwerker Posted March 5, 2012 Report Posted March 5, 2012 Or you could find out that someone took the time to properly assemble it and checked everything because they knew it was going to be on display. Check for missing accessories, guards paperwork, stuff like that. I have had great results buying refurb/returned tools. Factory cranks them out, tests a few every once in a while. Refurb usually means a tech went over it, fixed any problem and tested it! And I get a tool at a better price Quote
jmonroe Posted March 5, 2012 Report Posted March 5, 2012 A little over a year go, I purchased a SawStop Contractor saw that was fully loaded from WoodCraft. It was a floor model and it showed some definite signs of wear (scratch marks on the extension table where the fence slid, nicks around the insert, etc.). They had it on sale for something like $450 off the normal retail price, so I bought it. I still haven't found any problems with the saw, It was dead-accurate from the minute I brought it home and functioned flawlessly. I would expect the Unisaw to be no different, but I would see if they could knock a few hundred off the sticker price. Quote
TimV Posted March 5, 2012 Report Posted March 5, 2012 And how much of a discount are they offering you? Quote
wilburpan Posted March 6, 2012 Report Posted March 6, 2012 I probably should keep my mouth shut, since I don't have a table saw and have no plans to get one, but all the machinery that I have in my shop I picked up used and refurbished. Since you're dealing with a floor model, which presumably means that it hasn't been in someones' shop and returned, you can be pretty sure that the table saw hasn't been abused. Have them turn the saw on for you, and look for vibration and/or high pitched metal-on-metal noises. If there isn't anything obvious, and if the store is going to give you the original warranty, you're probably good to go. What you're looking for are bearing and arbor issues, and other potential problems related to moving parts. Alignment issues, like if a cast iron wing is slightly off, can be ignored. Regardless of how you get your table saw, you'll have to tweak it once it gets into your shop, even new out of the box. I'm pretty sure Marc has a video on setting up a new table saw. I'd push for a discount of at least 25%. Woodcraft routinely has 10-15% sales on the Jet/Powermatic/Rikon machinery that they carry that is brand new. Bottom line, any problems you might have with a floor model are going to be problems that could show up with a new machine. I have bought a bandsaw, two drill presses, and two lathes all used, all at least 60 years old, and have been able to get them back in top running condition, even though I don't think I have any particular skills when it comes to machinery. So dealing with a floor model should be fairly easy. But the real reason I'm jumping into this thread is that I can't resist talking to another Wilbur who's a woodworker. Quote
edh Posted March 8, 2012 Report Posted March 8, 2012 I have a few new tools but the bulk were bought second hand. I bought my 6" Delta jointer used from a Delta repair depot, back when Delta used to have them, and was able to speak to the repair tech directly before the purchase. He did recommend the jointer and also pointed out a few cosmetic issues. He was also able to outline why the original owner had returned it shortly after purchasing it and assured me the problem was not with the machine. I also have a very old Rockwell Unisaw that I purchased from a cabinet maker who had purchased it new. He was retiring and selling off his machinery. He provided me with all the service info that had been done to the machine. He also made some recommendations about what to watch for on the Unisaw. Interesting comment he made was that he was keeping his old Craftsman cabinetmakers saw because he swore it was the best saw ever made. So if I was in your position, I would want to speak to the store person who set up the saw at the store. If it was a chore given to a new employee, I would back off. If it was set up by a person who could discuss the set up with you and knows where the "left over" parts are, maybe if he says it's good, take a chance. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.