Dave H Posted April 3, 2012 Report Posted April 3, 2012 My new Delta 10" left tilting unisaw was just delivered to my shop. I've just inspected all the boxes for damage so far OK, now I have to go to work (working nights) I'm like a little kid at Christmas all I want to do is assemble the saw , and start playing. The saw is the 36-L352 it wieghs in at 500LB's I guess I'll start assembly tommorow get it setting where it's going to live then figure out what I want to do for the 220 circuit I'll need to power up. I have no accual questions yet, this is just mainly a shameless tool gloat. Dave 1 Quote
dwacker Posted April 3, 2012 Report Posted April 3, 2012 SWEEEEET. Congrats! I cant believe you didnt call in sick. Don Quote
Jfitz Posted April 3, 2012 Report Posted April 3, 2012 Congrats!! That's quite a saw. I'm also surprised the saw didn't give you eye problems - so you couldn't see going to work. Quote
jimmykx250 Posted April 3, 2012 Report Posted April 3, 2012 Congrats! I cant believe you dont have the power set up to plug it in! That wait would kill me! I would have a sparkey there on Ot if need be to power that bad boy up. Please do a review after you get a few hours under your belt. Quote
Beechwood Chip Posted April 3, 2012 Report Posted April 3, 2012 You might need a friend (or two) to help you with wings, rails, etc. If not, be smart about setting up things like roller stands to hold things in place while you tighten the bolts. Have you watched Marc's videos (1 and 2) on table saw setup? Quote
dcustoms Posted April 4, 2012 Report Posted April 4, 2012 Congrats on the saw!!! you'll never regret having that in your shop! Quote
Dave H Posted April 18, 2012 Author Report Posted April 18, 2012 Well I've finally got the Unisaw put together and the new wireing ran I decided to put in a ceiling recepticle and went with a retractable cord to power up the saw. Wow does this saw run smooth I've been working 6-10's sometimes 7-10's nights it's been hard find shop time but now that the weather is getting better I'll get more shop time, and put the new saw through the paces. The instructions left a little to be desired, and there where three different instructions one for the saw, fence, and cast iron wings it really is a beautiful saw, but maybe i'm just a little bias as i've been drooling over this saw for years. Quote
CessnaPilotBarry Posted April 24, 2012 Report Posted April 24, 2012 Very nice! Here's many years of enjoyment to ya'! Quote
shooterscott Posted May 14, 2012 Report Posted May 14, 2012 Very happy for you and your new friend, I hope you have many years of great cutting together. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.