wjffineww Posted May 12, 2012 Report Posted May 12, 2012 I have a Delta 14'' bandsaw. It works very well and I've been pretty happy with it. I do want to add a fence to it though. Clamping a homemade fence all the time has gotten old. I was looking at the Kreg fence and also the Woodhaven 7280. Any opinions on either of these, or a different one? I was also thinking about a riser block. It would be nice to have a little more resaw height. Any body try one on one of these saws? Thanks in advance for any opinions. Quote
Vic Posted May 13, 2012 Report Posted May 13, 2012 Check out this PDF. Michael Fortune's methods on the bandsaw are my favorite. http://www.furniture...aw_Complete.pdf Also, I think you'll be happy with risers and the Kreg fence. Risers aren't the best, but will do the trick to give you a decent amount of resaw capacity. I have the Rikon 10-325 Deluxe and outfitted it with the Drift Master from Laguna. You don't need to go to that extent, but it is a sweet set up, although I still like to get a larger bandsaw. Mostly for higher capacity curve work. Quote
Dave's Not Here Posted May 13, 2012 Report Posted May 13, 2012 I have a Rikon 10-325 Deluxe also and am very happy with the stock fence. Maybe you should see how much Vic would sell you his for? I will say that I have seen many more positive things being said about the Kreg fence than the Woodhaven but that probably doesn't really mean much. Quote
fransikaner Posted May 14, 2012 Report Posted May 14, 2012 I have the Laguna Driftmaster and have been very pleased with it. You might want to take a look at it. Quote
wjffineww Posted May 14, 2012 Author Report Posted May 14, 2012 The question I had with the Kreg is that the fence only clamps at one end, how well is the "free" end held in place? Also can you attach a tall fence to it for resawing purposes? Quote
konkers Posted May 15, 2012 Report Posted May 15, 2012 The question I had with the Kreg is that the fence only clamps at one end, how well is the "free" end held in place? Also can you attach a tall fence to it for resawing purposes? The fence has some T track style groves in it so you can easily bolt on an auxiliary fence for resawing. As for securing the other end, it secures fairly well in the track on the near side of the table. I haven't noticed the need to clamp the far side. FWIW, the driftmaster doesn't clamp on the far side either. Quote
over40pirate Posted May 16, 2012 Report Posted May 16, 2012 I have a Jet (same as newer Powermatic) fence on my old Delta 14" bs. I like it a lot. I don't have a riser, and resaw 5-6" with just the fence and 2 featherboards, with spacers, between them. My fence was from a 16" Jet, and I just had to reposition, the clip and glide on the end. The 2" extra length doesn't hurt when resawing. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.