prov163 Posted May 25, 2012 Report Posted May 25, 2012 Marc, I have learned a great deal from watching your videos and reading your articles. I just built a new outfeed table based on the "Somebody Feed Me" episode and it came out great. I am planning to use this design for a few other shop tables I need as well. I hope to have enough money to join the Guild soon, though in all honesty I think what you build is probably beyond my skill level. On the other hand, perhaps attempting them will increase my skill level. My question is prompted by consideration of buying a Festool TS55. Though we learned the metric system in school back in the late 60's and early 70's (yeah, I know I'm old), in expectation that the US was going metric, it never happened so I never retained it well. Anyway, I notice you use Imperial measurements but use Festool products a lot. How do you cope with the conversion factor? Please know I'm not being a snob, but having used the Imperial system so long, I'm afraid I'll lose my mind trying to use both systems. Also, since I plan to build most of my projects in solid wood rather than plywood (probably only use for larger cabinets as needed) do you think a track saw is a worthwhile investment? I'm presently ramping up to buy a planer and a jointer, so the track saw will be a later in the year purchase. Thanks again for sharing your skills and passion for woodworking! Derrick Quote
woodwhisperer Posted May 27, 2012 Report Posted May 27, 2012 Hey Derrick. Thanks for the kind words. And just briefly concerning the Guild, it is never too early to see how projects go together. All of the skills shown in our videos are transferrable to other projects and even if you never build the piece from that series, there is always someone a beginner can learn. As to the whole metric thing, it's pretty simple. I just don't look at the scales. In fact, there are very few machines that feature scales that I trust. I usually measure, strike a line, then cut to the line. I find that much more reliable and accurate. So whether the tool is metric or imperial, it has no impact on my work. And while i think a tracksaw is a great investment, it really does excel when it comes to sheetgoods. So in my opinion, if you aren't going to be working with lots of sheetgoods, you can probably hold off on the tracksaw purchase. Quote
Vic Posted May 27, 2012 Report Posted May 27, 2012 Marc, I have learned a great deal from watching your videos and reading your articles. I just built a new outfeed table based on the "Somebody Feed Me" episode and it came out great. I am planning to use this design for a few other shop tables I need as well. I hope to have enough money to join the Guild soon, though in all honesty I think what you build is probably beyond my skill level. On the other hand, perhaps attempting them will increase my skill level. My question is prompted by consideration of buying a Festool TS55. Though we learned the metric system in school back in the late 60's and early 70's (yeah, I know I'm old), in expectation that the US was going metric, it never happened so I never retained it well. Anyway, I notice you use Imperial measurements but use Festool products a lot. How do you cope with the conversion factor? Please know I'm not being a snob, but having used the Imperial system so long, I'm afraid I'll lose my mind trying to use both systems. Also, since I plan to build most of my projects in solid wood rather than plywood (probably only use for larger cabinets as needed) do you think a track saw is a worthwhile investment? I'm presently ramping up to buy a planer and a jointer, so the track saw will be a later in the year purchase. Thanks again for sharing your skills and passion for woodworking! Derrick Derrick, I would suggest joining the Guild. It will help you not only learn all the terminology, it will help you understand the why of how things are built. Marc really does an excellent job of breaking things down into very manageable parts. That is the key to building. Then when you start, just take all the time you need to do a great job. No one will be grading your speed. If you do that you will learn fast and do well. While the Split Top Roubo is a daunting build, it is just a series of specific operations. If I can do this stuff, you can. 1 Quote
STL Woodguy Posted May 29, 2012 Report Posted May 29, 2012 How do you cope with the conversion factor? Please know I'm not being a snob, but having used the Imperial system so long, I'm afraid I'll lose my mind trying to use both systems. When I went down the same route, I found that it's honestly easier to put imperial "how many" conversions completely out of your mind. So something that is 25mm is simply 25mm, not thought of as being almost one inch. I like the metric system a lot when starting with some new projects, no fractions to add up or work out. Otherwise if I have been working with a project or plans that involved imperial measurements, that's what I stick with. Quote
prov163 Posted May 29, 2012 Author Report Posted May 29, 2012 Marc, I was thinking that the only time conversion would come into play is if I am working from a set of plans drawn by somebody else so your comments make perfect sense. I do plan to join the Guild at the end of summer. I spent last weekend putting insulation and plywood walls in my 12X24 shop. I'm now in the process of moving equipment, building shop furniture, etc. so that when summer ends, I can get serious about woodworking. I look forward to doing a build with you and the Guild this fall. Vic, I think it was the Split-Top Roubo that made me think the Guild was beyond my skills at this point. However, as you say, like eating an elephant, it's all about bite-size pieces. As I build shop furniture this summer, I intend to use a few different joinery techniques to hone my skills a bit. Also hope to take a couple of classes at Highland Woodworking about 1.5 hours away. That should prime me for the Guild build. Ends, I think if I had stuck with the metric system when I learned in school, I would love it. I work with an archaeologist who spends most of his time in the Middle East and when he's here he's always asking me where the "meter stick" is and using metric measurements when he asks for something. Should have spent more time listening and less time checking out Delilah Lindsey Quote
Andrew Pritchard Posted June 13, 2012 Report Posted June 13, 2012 Being born in Britain I was always taught the metric system. Decimalization in the UK was a big thing in the 70s. Bizarrely they still use miles and miles per hour on the roads. I recently emigrated to Canada and this part of the world they use imperial. To begin with I found it difficult to adjust to the differences. Bizarrely, they use kilometres and KPH on the roads. Most of my tools at the time of emigration were metric and 220 volt, but all the tools and supplies here are imperial (and 110v). I ended up buying a new combination square as the one I had was too small - and metric only! Now I mostly rely on relative dimensioning for just about everything. There are so many other things I've had to adapt to - this is just another one. Quote
Vic Posted June 13, 2012 Report Posted June 13, 2012 I have a dozen or so metric stick rules. I love them for finding center. Way easier than imperial. Quote
nikbrown Posted June 14, 2012 Report Posted June 14, 2012 I've been using the shaku scale a lot recently (it's very similar to the metric scale and super easy when doing center line work). As marc said numbers only matter when making the measurements. Mesure and mark a line then cut the line. I never bother converting anything. Quote
Bobby Slack Posted June 14, 2012 Report Posted June 14, 2012 I use metric for all my drawings. Fount it easier to work in Sketchup for some reason. I second Marc, measure in whatever system, strike a line, cut to the line. Quote
PaulMarcel Posted June 14, 2012 Report Posted June 14, 2012 I usually make a story pole out of stretchy twine. Tie a knot where I need to cut. When I cut, I pull it taut, which stretches it and automatically adds the proper allowances for me cutting it too short. Works great. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.