Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sanding Through Edges

Featured Replies

Does anyone have advice on how to not sand "cut" through edges when rubbing out. I have a chair I have been working on all summer and I sanded up to 220, stained and put 2 coats of shellac and then 5 coats of lacquer. Next I went with 600 to level the surface, all was fine, then I went to 1000 Abralon pads by hand and I was very conscious about stay away from the edges, however, on the small parts I still managed to cut through.

Can I fix this without having to start over, there is not a whole lot, but it appeared in the most prominent places.

Thanks

Aaron

  • 2 weeks later...

You'll have greater control with scuff pads (nylon steel wool) the auto body type. They work well on spindles or non-flat work and especially contours. Mirka has the Mirlon and are excellent. I will use these to start with in lower grit. Then work up to the Abralon pads.

-Ace-

I like to use the Festool Platin pads. I use them free hand, not with a sander. The biggest advantage to me is they are foam backed. You can get a really gentle touch on edges - even rounded or eased edges. I have them in 1000 and 2000 grit.

I touch up with the stain if needed and then spot spray several light coats to build finish over the repairs before I complete the finishing process. To prevent and avoid sand thru we slightly break all sharp corners when sanding to promote finish flowing over the corner. A sharp corner can make the finish pull back due to surface tension. We also spray all the corners and edges first and let it dry just a little before spraying the whole piece. Sometimes we put 2 or 3 coats of sanding sealer on before sanding so there is plenty of finish over the stain .

Did the 1000 cut through, or was it a previous step that gotcha?

I think your question is spot on. He probably went through long before the 1000 grit.

  • Author

Sorry it took me longer to respond, have been a little busy with other things. I did not notice the cut through when using the 600, maybe the abralon pronounced it a little more. Mostly I have come to the conclusion that the lighting in my tiny little basement shop is terrible. I have set up some raking lights and such, but it is dark and dreary, I would really love to have some natural light.

I thank all of you for your tips and resolutions. Thank you wdweker, I ended up touching up the stain with a paint brush and used aerosol top coat to finish up. With my lack of experience, it turned out okay, actually better than I thought. I will have to check out Mirlon and Platin as I am not familiar and I will attempt those products next time.

Do many of you you round over corners slightly. I always like the look of sharp edges, but I guess that makes them more susceptible to cut through and probably damage just from everyday use of the piece.

Thank you all again. I have been learning a lot from this forum.

Aaron

Aaron, I always "ease the edges" on my corners. It makes for a much more forgiving edge. Steve is dead right about the why's and it isn't as noticable as you would think. You can still get the look of a sharp edge, but just that little bit of sanding the corner with a few passes by hand will make all the difference in the world.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.