Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shellac overhyped?

Featured Replies

Does anyone get "Woodshop News", specifically have you read the article "Shellac overhyped as a sealer" by Bob Flexner. I don't have the depth of knowledge to question the article. I am just wondering if anyone has any opinions they would offer up after reading the article?

If that link is the same as the article in question, then i don't see why it questions shellac's capability as a sealant or act as a barrier coat -- something that Flexner has always advocated in the past... I agree about the articles points on building to a finish, but that's not the same thing...

OK, it's probably more accurate to summarize this article as "shellac overhyped as a faster way to get to your final build". When I hear of shellac being used as a "sealer", I'm thinking either blotch control or as a stiffener for sanding soft, fuzzy woods.

Anyway, after reading the article three times, I concluded that it's a.) in need of better illustrations and a more clear explanation and more importantly b.) fascinating but not relevant to my work. The proposed benefit of shellac that Flexner has debunked seems to be this: A time-conscious woodworker who, facing a loathsome schedule of, say ten coats of something that dries slowly, thinks that he could speed things up by making the first few coats in fast-drying shellac.

As for me, I generally don't finish my work with thick builds. On the rare pieces where I did do a thick build followed by rubbing out, it was all with shellac anyway.

Read this, should fall into place. Pay close attention to his use of the word "holdout" to fill pores. Scroll up a page to the beginning of the article..

http://books.google.com/books?id=ofYDAAAAMBAJ&pg=PA42&lpg=PA42&dq=holdout+of+a+paint+sealer&source=bl&ots=Uw65moGp0K&sig=Tm1OZRTDz_b6CmNot0gLZejVGyg&hl=en#v=onepage&q=holdout%20of%20a%20paint%20sealer&f=false

A faux finisher told me that shellac made applying a water based glaze difficult. I only use shellac as a barrier coat when needed.

Water Bourne sanding sealer and a water bourne pre cat acrylic top coat works wonders for me. M L Campbell Agualente is a bit pricey but no $$ for solvents and their flammable vapors is a big plus. It dries so clear that light woods stay white instead of adding an amber tint.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.