Hybrid-woodworker Posted October 8, 2012 Report Posted October 8, 2012 Well my compressor died a very loud and agonizing death today. Small vertical oil less. This time I would like something less noisy and longer lasting. Anyone have any experience with compressors requiring oiling? I am wondering if oil separators actually work or is there some oil left in the air that could/does end up on the stock. BRuce Quote
Dave H Posted October 8, 2012 Report Posted October 8, 2012 My 4 gal Dewalt uses oil, never had oil come out the hose that I've noticed. My compressor is 13+ yrs old , and running strong I only had to replace one of the gauges I think it was the regulated pressure gauge. Quote
jimmykx250 Posted October 8, 2012 Report Posted October 8, 2012 How old was your compressor? I've always heard of the tanks failing but not the motor going. I have a pancake model that has got to 15 + years old and still running strong. Are you sure your not talking about a water separator after the compressor? I've seen those and they say you should use them but i drain my pancake pretty frequently and keep the guns well oiled. I'm curious what kind of feedback you will get on this. Quote
Trip Posted October 8, 2012 Report Posted October 8, 2012 how big and $$? i've gone 65gal/6.5HP and never looked back... but i like air sanders... Quote
Colorado Brian Posted October 8, 2012 Report Posted October 8, 2012 My second pancake compressor burned out a couple months ago and I just bought an oiled compressor and can't believe how quiet they are. I looked at the big 65 gallon but didn't want to run another 220V circuit and since I have a turbine to spray I didn't need that much air. I bought the medium size one from Home Depot. I think its about 35 gallon and runs on 110v plus it's about half the price of the big one. I have an oil and water filter on it and haven't had any problems with it getting on the wood. Quote
rodger. Posted October 8, 2012 Report Posted October 8, 2012 I have a small Dewalt compressor (non oil) that is awesome for brad and pin nailers. It makes less noise than a typical vaccuum cleaner (70 db). I would highly recommend it to anyone who doesn't need massive air requirements (like sanding). http://www.dewalt.com/tools/compressors-hand-carry---electric-d55140.aspx Quote
Hybrid-woodworker Posted October 8, 2012 Author Report Posted October 8, 2012 Thanks for the comments. I don't do any sanding but I do want a little larger unit. I looked at the Makita on Amazon and I will now take a look at the Home Depot model. Thanks for the info on the oil and water. BRuce Quote
Boatworks Today Posted October 8, 2012 Report Posted October 8, 2012 (edited) I'd take a look at these guys as well. http://www.eatoncomp...e/504413.htm��I bought a portable gas fired unit for mobile work (running sanders, sprayers, etc) and it works very well. I needed something that could really move some air and for the dollar I felt these guys had the best option. Mostly American made and the customer service is very good. Quality components. I think they are best known for their stationary units (the portable ones I suspect are a small part of their business). When my Ingersol dies at the shop I'll be replacing with one of their units. My IR at the shop is a 3hp oil compressor and have never had an issue with air contamination. I do have a large filter inline, but even when bleeding the moisture from the filter never have any oil with it.. I looked back on the link I posted and it doesn't appear to be working. Try this one.. The manufacturer is Eaton Compressor http://www.eatoncompressor.com/page/page/504747.htm Edited October 10, 2012 by Boatworks Today Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.