Recommended Posts

Posted

Hiya woodsters,

I've been lurking here for a bit and listening to a bunch of the old podcasts, I finally have something to talk about so I thought I would do my first post.

My wife and I just relocated to Covington/Maple Valley Washington from Ventura, CA. We moved from a small 1200ft 1950's craftsman house to a much larger home here on a lake. I had a tiny one car garage where I tried to do some WW and had an ancient craftsman saw and workmate and all the basic handheld power tools, router, drills, skillsaw, chopsaw, sawsall I did a lot of home/boat restoration work and built things like a Top Bar Beehives, Beekeeping NUC boxes, huge 6ft x 4ft garden box, garage gates etc. I've always wanted to do more woodworking remembering the "old days" when I was in school taking shop classes. I sold off the larger items before out move like the old table saw and workmate and a bunch of the old tools you accumulate and kept my "good stuff" and some basics. Our new home has a large seperate room located in our walk out basement perfect for a wood shop (18x27 with a half bath) so I am building it out now and accumulating my basic tools.

Since I am relatively close to Grizzly I wanted to get a descent saw and drove up there last week and picked up the Hybrid Tablesaw G0715P and Cyclone Dust Collector G0703P, I also picked up a 30x96 maple worktop. I am clearing out a bunch of base and wall cabinets in a spare room/office and using them as my work surfaces and base for my new workbench. So I figured that was a good start and wanted to keep an eye on Craigslist for a planer and maybe a jointer. After chasing a couple of dead ends on a Dewalt 735 I finally saw one pop up yesterday with little use a really crappy picture but it had a picture of the label DW735 asking price of $250. Unfortunately that same night my truck was hospitalized with a bad wheel bearing so I drove my wifes Mini Cooper out to take a look at this planer. So of course I show up and the planer looks great and has the infeed/outfeed tables. I fired it up and tested it, noticed they had an old 6" powermatic 054 sitting there too. Asked if they were going to be selling anything else, they said yes that planer and a few other things. I bought and took the planer last night and said I may want to pick up a few other items they had if they were looking to sell it.

So here is my new/old gear I picked up and unloaded in the garage for tonight where I'll clean it up before I do the move into the basement shop.

The grand total for the gear was $675 which I thought ended up being a pretty good deal so I went ahead and escalated my purchase plans. The items I ended up with tonight are a Planer DW735, Powermatic 054 Jointer, Grizzly G0555 bandsaw with riser, Shopfox Mortiser w/bits, and a Delta 4" belt/6 disc sander.

I need to be done buying tools for a while and work on putting this all together and figure out the bugs and final arrangements. I'll be reading lots of all of your posts and pouring through the podcasts as I come across issues/questions. I need to produce some Adirondack chairs soon to appease the spousal unit.

Thanks all! I would have posted more pics but hit my limit quickly.

James

post-7578-0-54767200-1351748686_thumb.jp

post-7578-0-89043800-1351748695_thumb.jp

post-7578-0-30263900-1351748706_thumb.jp

Posted

Welcome James! Are you familiar with the Modern Woodworkers Association? I'm the Chapter Head for the MWA in Seattle. You are close to Seattle, and would love to have you join our group. We try to get together once a month, generally on a weekend. We get together for breakfast or lunch, and try to work in a "field trip" somewhere. If you are interested, Join at the link below, and your contact information will be sent to me.

http://www.modernwoodworkersassociation.com/

Mike

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.