Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

refinishing

Featured Replies

spent some time sanding down a quilt rack that had some kind of finish on it so i can put a new finish on it. but i cant get everything off. i had thought that i had goten everything but there are still spots and streaks of the old finish on it that show up when i try to put linseed oil on it. does anyone have any tips for geting everything sanded off?

if someone didnt say they wanted it and i told them i would refinish it i would just toss it aside since i hate refinishing for this reason.

Have you tried scraping?

I agree with you - I would rather build a new piece than refinish an existing one.

  • Author

yes i have i tried a card scraper but i suck at sharpening it and i cant seem to get a decent cut out of it. dont know if its my technique or lack of a sharp edge or what god i wish i was aprenticed to someone who can show me how to do this stuff.

Solvent and a coarse abrasive pad might work. Try it in an inconspicuous place first. Solvent depends on what the finish might be. Start with mineral spirits, then naphtha , acetone, lacquer thinner and MEK as a last resort . Wear gloves and a respirator. Might be tough out in the cold but it beats the smell indoors.

In those hard to reach places, I've always used a multi-tool with the sander attachment. A profile sander works as well. If none of these suggestions work, just cover it up with a polyshade finish and be done with it. I hate refinishing too.

Apply a good paint stripper and scrub the wood with coarse steel wool. The paint stripper will soak and get down into the grain lifting out the old finish along with the linseed oil, thus getting you back to a starting point. When completed wash the wood with mineral sprits, let dry and sand through the the grits.

-Ace-

  • Author

ok thanks i wish i hadent told someone i would do this because i dont want to do it.

Duck don't get too down. Yea...refinishing is work. But when done right...very rewarding. Dude...this is cake...try stripping a set of chairs sometime that have slat backs.

-Ace-

  • Author

how about if i just put it in a sand plasting wind tunnel :) striped in 30 seconds flat

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.