Recommended Posts

Posted

Hello to all..I've been enjoying reading and learning about your projects and I'm happy to join in. I'm pretty much a beginner although I've worked with wood for years but more in a job related way where very little precision and finishing was required. Now that I'm retired I want to learn and build and generally just make a lot of sawdust and chips.

My user name is "chipmaster" (not sure why I picked "master") but all my friends call me R.A. Pick which ever one you want or you can make up something, I'll answer to almost anything.

RA

Posted

Hello to all..I've been enjoying reading and learning about your projects and I'm happy to join in. I'm pretty much a beginner although I've worked with wood for years but more in a job related way where very little precision and finishing was required. Now that I'm retired I want to learn and build and generally just make a lot of sawdust and chips.

My user name is "chipmaster" (not sure why I picked "master") but all my friends call me R.A. Pick which ever one you want or you can make up something, I'll answer to almost anything.

RA

anything? man you are so leaving yourself open to a hard time...........welcome i think you will enjoy this forum realy lively and active members. if you have any questions i have yet to not have some kind of response to a question.

Posted

anything? man you are so leaving yourself open to a hard time...........welcome i think you will enjoy this forum realy lively and active members. if you have any questions i have yet to not have some kind of response to a question.

Yes..I thought about that right after I hit the post...too late. I'll have to rely on the "almost" anything. Thanks for the welcome, I've read many of you posts and I'll probably throw you some questions.. you seem to be very knowledgeable. I'm looking forward to being in the forum. Thanks again.
Posted

Well welcome "late to dinner" You did say call you anything right?

Ha..I haven't been late for dinner..but a day late and a dollar short? yeah I'm familiar with that. Thanks for the welcome..I'm looking forward to being a part of the forum.
Posted

Yes..I thought about that right after I hit the post...too late. I'll have to rely on the "almost" anything. Thanks for the welcome, I've read many of you posts and I'll probably throw you some questions.. you seem to be very knowledgeable. I'm looking forward to being in the forum. Thanks again.

is that me personaly knowledgeable or the forum in general because to tell the truth i make stuff up and make it sound correct :) still got alot to learn but i spent the last year folcusing on wood turning so i have picked up a few things about lathes and the basics of wood working soon ill spend some time concentraiting on wood carving, then perhaps stone carving, leather working, ect.... but if you do have questions feel free to shoot me a message.

Posted

is that me personaly knowledgeable or the forum in general because to tell the truth i make stuff up and make it sound correct :) still got alot to learn but i spent the last year folcusing on wood turning so i have picked up a few things about lathes and the basics of wood working soon ill spend some time concentraiting on wood carving, then perhaps stone carving, leather working, ect.... but if you do have questions feel free to shoot me a message.

Wow...stone carving? You're a man of many talents. I can relate though..I tend to get all absorbed in something and eventually want a new challenge so I bounce around with oil painting, carving (more like whittling) walking sticks and of course, woodworking. This past year I've been entertaining the idea of wood turning and have looked at a lot of lathes but it's pretty hard to pull the trigger on that much expense. I haven't figured out how to convince my wife that I NEED that lathe. Used ones are hard to find around here so that idea remains just an idea. I like the Delta midi lathe with the VS, 1 Hp, reversible, but also the Jet..what do you have? I probably should learn more about using my table saw before moving on to something new...but...I want to do it ALL...right now..There in lies the problem..patience. Do you know of a place that carries used stuff?
Posted

pawn shops for used stuff and craigs list. delttas a realy nice machine. the reverse makes it easy to sand. the belt speeds can be changed in a second. because of the size and set up the the belt system. with a 12 inch swing you will have plenty of room for everythng but the huge platers and vases but for 99 percent of your turning unless you do specilty iteams like vases as large as you. you wont need the larger lathes. but you want to make shure you have plenty of weight below the machine to keep it from walking on you. i just bolted my lathe to a dressor with sandbags in the bottom two drawers. i can help you make your own tools and some decorating tools. and get you into the different aspects of wood turning. you might be happy just geting a penn state lathe and a set of tools for around 500 dollers. i sugest you get a chuck so you can make bowls and vases ect.... if you decide to bite the bullet let me know i can help you get set up.

Posted

Welcome to the neighborhood! There is a wide range of experience available to question and bounce ideas off of. I have been doing custom woodwork professionally for 35 years but still learn from skilled hobbiests who have more knowledge about a specific topic.

You might get conflicting opinions on how to approach a project and they can all work. The trick is to figure out what will work with your tools and skills.

  • 2 weeks later...
Posted

Thanks guys. Sorry I haven't acknowledged your posts but I haven't quite figured out to get around in here..didn't see your messages till just now.

duckkisser..Hadn't thought about pawn shops. I appreciate your kind offer to help me get started...who knows..Santa might just have to carry an extra heavy toy this year..I'll let you know.

wdwerker..Good advice, thanks. One of the main reasons I like woodworking is that you can never learn it all. If one ever thinks he knows it all he's stopped learning...bad spot to be in.

I've enjoyed reading both of you fellas replies to questions from members...the only problem is that I get on here and stay for hours..wife can't relate.

Yall have a Merry Christmas.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 58 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined