Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finish for an engagement ring box?

Featured Replies

Hello all!

First post here on the forum (and first foray into woodworking on my own; my used to do a lot and gifted me some tools), and I'm looking for advice on a finish to use for a small (2x2x1.75) engagement ring box I'm making for my future (hopefully!) fiancé. Pictures below.

It's wenge and padauk, and I'm looking for a smooth, high-shine look, similar to a guitar finish.

Was thinking a wipe-on poly or shellac. Never done this on my own before, so if I'm way off the mark, let me know!

Thanks!

Chris

post-8370-0-54086900-1355265683_thumb.jp

post-8370-0-67226600-1355265688_thumb.jp

Congrats and welcome. a wipe on poly will do the trick. Arm-R-Seal seams to be a crowd favorite. A water based wipe on is even easier to use and dries faster then an oil based finish, but you need more coats.

Make sure you sand the box well. Also, if you plan to rub out the finish (more or less...wet sand the finish with super high grits...>1500) then put on a couple more coats that you think you will need so you don't burn through the finish.

Good luck! Be sure to update us on how the whole thing works out.

i would sugest that you find out a smell that is her favorite then get some sented oil from a health food store and rub it into the inside of the box. that way everytime she opens it it will smell pleasent. my boxes i often use orange oil the inside of the box smells like freshly pealed oranges.

I'd also pad on thin shellac.

Sand the box to 220, apply one coat of approximately a one pound cut, wipe on ONCE, let dry. Sand to 320, and continue with the same shellac, wiping ONCE, letting dry... repeat as necessary. Do not go back over the soft shellac. You can sand every few coats with progressively finer 400-600-800, if desired. The wipes dry almost immediately, like a fat Sharpie marker might.

You can follow with 0000 steel wool and wax to make it buttery smooth and whatever sheen you'd like.

You could finish that box this way in less than an hour, and end up with a finish that won't stink, feels BEAUTIFUL to the touch, and is non-toxic, to boot.

Try it on scrap...

  • 4 weeks later...

nice what no wood ring?

so is it a yes or no? have we lost a soldier to the good fight? :)

Great job, stl. That was the easy part. Now you have to convince her to take the ring.

i noticed no one asked this and you didnt realy say but is the ring for your girlfriend and not someone like the grocery store check out girl right? are you planing on going up strangers and poping the question? if so you just went to the top of the list for creepy guy who rides the bus :)

call me a softy but im a little giddy :) hope everything is good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.