Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Espresso Color on maple

Featured Replies

I was asked to build shelves for a nursery, and I decided to take on the task. I have a ton of maple left over from previous jobs that I was using for drawers. I know my very first mistake was building the shelves out of hard maple. But the lady wants espresso color. I have been testing this and that on test pieces and everything looks terrible. I have tried General Finishes espresso water based stain. I have tried general finishes dark brown dye. I have tried a mixture of the two. I am actually completely lost trying to get this color right. Any suggestions? Any and all help is appreciated.

By "color wrong" do you mean not dark enough? Hard maple is kinda impervious. What grit did you sand to? Take a sample piece to the same grit then back off to a coarser grit; the stain needs to hook its pigments into something and the coarser scratch helps. Another option might be to go the dye route, but test the dye you want to use; some 'black' dyes are really really violet instead and can have a violet cast in the right (wrong?) light.

Another approach is to tint your finish and put many thin coats to build towards the color and intensity desired. We use a pre cat acrylic waterbourne finish and our supplier will tint it to match a sample swatch.

By the time you get to espresso all the wood grain is hidden unless you use something like ash or oak.

After you get to the color you want top it off with a coat or 2 of clear.

  • Author

Paul, as far as the wrong color, I mean if I wipe off either the stain or dye, it is very light. I was told at a rockler store to only sand to 120 which I did. If I let the stain dry it looked black. There didn't seem to be a happy medium.

Steve, How do you go about tinting something like water based poly? I have a spray system, and I tried mixing a little water based dark brown dye with water based poly, and the first couple coats actually looked very red.

Try using trans tint dye with alcohol. Sand to 180, 220 on end grain. you may require 2 coats, then use the dye in a top coat to tone it to the correct color. You can use the same trans tint dye(no alcohol) in WB poly.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.